Construction of a high-density genetic map for sesame based on large scale marker development by specific length amplified fragment (SLAF) sequencing
© Zhang et al.; licensee BioMed Central Ltd. 2013
Received: 2 May 2013
Accepted: 20 September 2013
Published: 24 September 2013
The genetics and molecular biology of sesame has only recently begun to be studied even though sesame is an important oil seed crop. A high-density genetic map for sesame has not been published yet due to a lack of sufficient molecular markers. Specific length amplified fragment sequencing (SLAF-seq) is a recently developed high-resolution strategy for large-scale de novo SNP discovery and genotyping. SLAF-seq was employed in this study to obtain sufficient markers to construct a high-density genetic map for sesame.
In total, 28.21 Gb of data containing 201,488,285 pair-end reads was obtained after sequencing. The average coverage for each SLAF marker was 23.48-fold in the male parent, 23.38-fold in the female parent, and 14.46-fold average in each F2 individual. In total, 71,793 high-quality SLAFs were detected of which 3,673 SLAFs were polymorphic and 1,272 of the polymorphic markers met the requirements for use in the construction of a genetic map. The final map included 1,233 markers on the 15 linkage groups (LGs) and was 1,474.87 cM in length with an average distance of 1.20 cM between adjacent markers. To our knowledge, this map is the densest genetic linkage map to date for sesame. 'SNP_only’ markers accounted for 87.51% of the markers on the map. A total of 205 markers on the map showed significant (P < 0.05) segregation distortion.
We report here the first high-density genetic map for sesame. The map was constructed using an F2 population and the SLAF-seq approach, which allowed the efficient development of a large number of polymorphic markers in a short time. Results of this study will not only provide a platform for gene/QTL fine mapping, map-based gene isolation, and molecular breeding for sesame, but will also serve as a reference for positioning sequence scaffolds on a physical map, to assist in the process of assembling the sesame genome sequence.
Sesamum indicum L. (sesame), a diploid species (2n = 26), is one of the most ancient oil seed crops . About 4 million tons of sesame seeds are produced each year worldwide (http://faostat.fao.org/). Sesame seeds are an important source of high-quality oil containing natural antioxidants such as sesamin and sesamol. Despite its economic importance and nutritional value, the genetic and molecular biology study of sesame began only recently. Just one genetic map has been published for sesame  and quantitative trail loci (QTL) mapping has not been reported.
A genetic map, especially a high-density genetic map, provides an important foundation for QTL mapping [3–5] and for anchoring sequence scaffolds [6, 7]. Large-scale microsatellite marker development is an important approach to obtain sufficient numbers of markers to construct a high-density genetic map. This approach was used for tobacco (Nicotiana tabacum L.)  and Japanese flounder (Paralichthys olivaceus) , constructing high-density genetic map with an average interval of less than 1.5 cM between markers, and the developed SSR markers will also be important tools to further advance genome analysis. Another approach to construct a high-density genetic map is to utilize several types of available markers in a single study. Troggio et al.  published a dense genetic linkage map for grapevine that was constructed using 483 single-nucleotide polymorphism (SNP)-based genetic markers, 132 simple sequence repeats (SSRs), and 379 amplified fragment length polymorphisms (AFLPs). The SNP-based markers were developed from BAC-end sequence resources, and their inclusion significantly increased the density of the map. Wang et al.  constructed a high-density genetic linkage map for cabbage with 602 SSRs and 625 SNPs that spanned a total of 1,197.9 cM with an average of 0.98 cM between adjacent loci. In this case, the SNP markers were developed by resequencing the other parent of a mapping population.
SNPs are more useful as genetic markers than many conventional markers because they are the most abundant and stabile form of genetic variation in most genomes . Sequence polymorphisms introduced by SNPs are easy to compile in a database and are useful for evolutionary studies . High-throughput methods for SNP identification and genotyping have been rapidly developed to exploit these advantages. Miller et al.  developed a rapid and cost-effective polymorphism identification and genotyping approach using restriction site-associated DNA (RAD) markers. This approach was used for rapid SNP discovery and genetic linkage mapping in many organisms including stickleback, Neurospora crassa, Plutella xylostella, barley, and grape [13–16]. Peterson et al.  reported a modified low-cost RAD sequencing (RADseq) approach called double digest RADseq as a complete laboratory protocol requiring no prior genomic knowledge. Poland et al.  also developed a novel two-enzyme genotyping-by-sequencing (GBS) approach and used it to construct high-density genetic maps for barley and wheat. The use of two enzymes differed from the original GBS protocol in that amplified fragments in the two-enzyme libraries all consisted of the barcoded forward adapter and the common reverse adapter. This method of library construction greatly simplified the quantification of the library prior to sequencing. Recently, Sun et al.  reported the development of specific length amplified fragment sequencing (SLAF-seq) as a high-resolution strategy for large-scale de novo SNP discovery and genotyping. The efficiency of this approach was tested on data from rice and soybean and used to create a genetic map for common carp (Cyprinus carpio L.), which was the highest-density genetic map yet for any organism without the benefit of a reference genome sequence.
Since 1999, several kinds of markers have been used to assess the genetic diversity of sesame accessions including random amplified polymorphic DNA (RAPD) [20, 21], inter-simple sequence repeat (ISSR) [22, 23], AFLP [24, 25], sequence-related amplified polymorphism (SRAP) [26, 27], and random selective amplification of microsatellite polymorphic loci (RSAMPL) , but no SSR markers were available for sesame until 2005. Dixit et al.  developed the first series of SSR markers for sesame and more than 500 SSR markers have been developed and published to date [2, 28–31]. Despite the demonstrated importance of SSR markers for constructing genetic maps in many crops, the quantity of available sesame SSR markers was not sufficient to meet the requirements of genetic map construction due to the low polymorphism rate in these markers. Wei et al.  constructed the first genetic map for sesame using 120 EST-SSRs, 256 AFLPs, and 8,576 RSAMPLs, but only 220 of these markers (8 EST-SSRs, 25 AFLPs, and 187 RSAMPLs) were mapped in 30 linkage groups covering 936.72 cM with an average marker spacing of 4.93 cM. Wei et al.  pointed out the need for additional markers to obtain an accurate length of the sesame genome and high-density map coverage. Subsequently, Zhang et al.  integrated 14 genic SSRs into 9 main linkage groups on this map. But a high-density genetic map for sesame has not been published yet due to a lack of sufficient molecular markers.
In this study, we employed the recently developed SLAF-seq approach to achieve the first rapid mass discovery of SNP and insertion-deletion (InDel) markers for sesame. Using these newly developed markers, a high-density genetic map was constructed and its characteristics were investigated, the method used in this study for developing markers and future applications for this genetic map were also discussed.
Analysis of SLAF-seq data and SLAF markers
After SLAF library construction and high-throughput sequencing, 28.21 Gb of data containing 201,488,285 pair-end reads was obtained with each read being ~70 bp in length. The Q20 (means a quality score of 20, indicating a 1% chance of an error, and thus 99% confidence) ratio was 74.32% and guanine-cytosine (GC) content was 40.60%. Of these high-quality data, ~158 Mb were from the male parent with 2,259,333 reads and ~157 Mb were from the female parent with 2,246,084 reads. Read numbers for the 107 individuals in the F2 population ranged from 824,263 to 3,122,925 with an average of 1,416,287.
SLAF markers mining results
Number of SLAF markers
Number of reads
Basic characteristics of the genetic map
After linkage analysis, 1,233 (Additional file 1) of the 1,272 (Additional file 2) markers were mapped onto the genetic map, while other 39 markers were failed to be linked to any group. Coverage of these markers was 23.83-fold in the male parent, 23.32-fold in the female parent, and 14.96-fold in each F2 individual on average. The integrity of each marker among the 107 F2 individuals was also a key parameter for controlling map quality. All of the markers on the map had 98% integrity on average.
Description on basic characteristics of the 15 linkage groups
Number of markers
Average distance between markers (cM)
Largest gap (cM)
Gaps < =5
Distribution of markers types on the genetic map
Statistic of mapped SNP marker types
Segregation distortion markers on the map
Distribution of segregation distortion markers
Segregation distortion marker
Frequency of segregation distortion marker
The need to develop markers for sesame by sequencing
According to published results of research on sesame, the genetic diversity is low between germplasm resources [20–22, 24, 26, 27] and genetic differences between cultivars are limited [23, 25, 30, 32]. The close genetic relatedness between accessions could account for the low polymorphism of molecular markers. The polymorphism rates have been reported for a variety of markers in sesame including 20% for EST-SSR , 7.50% for EST-SSR, 9.00% for AFLP, 2.30% for RSAMPL , 11.59% for genic-SSR , 3.81% for cDNA-SSR , and 5.12% for SLAF markers (SNP and InDel in this study). The limited quantity of available markers and their low polymorphism rate makes construction of a genetic linkage map with high-density markers for sesame almost impossible using conventional methods. Genotyping by sequencing is a high-throughput technique that opens the door for the efficient development of large numbers of markers in a short time to generate enough polymorphic markers for high-density genetic map construction.
The advantages of SLAF sequencing for developing markers
In contrast to inefficient, expensive, and time-consuming conventional methods of developing markers, bioinformatics analyses were carried out before SLAF sequencing; the reference genome of sesame (unpublished data) was analyzed, considering the information on genomic GC content, repeat conditions, and genetic characteristics. We designed an approach to ensure density, uniformity, and efficiency of marker development. The SLAF-seq method provided significant advantages such as the development of large numbers of markers having high accuracy with less sequencing, making it especially suited for analysis of species with low polymorphism like sesame. This study provides the first development of markers on large scale for sesame in total, 71,793 SLAF markers were developed based on high-throughput sequencing, and 1,272 polymorphic markers were identified for genetic linkage map construction. Marker integrity and accuracy were high and marker quality and quantity met the requirements for construction of a genetic map. Results also accurately reflect the genetic and polymorphism characteristics of sesame, which added to our understanding of the genetics of this species.
Use of segregation distortion markers increased the genome coverage of the map
Because of the limited quantity of available molecular markers for sesame and their low polymorphism rate, additional markers such as segregation distortion markers should be used to construct a high-density genetic map. Segregation distortion is a common phenomenon that has been observed in many studies. The genotypic frequency of a segregation distortion marker deviates from a typical Mendelian ratio. This deviation may be caused by gametic selection , zygotic selection , or both. In this study, a genetic map was constructed first using Mendelian markers. Segregation distortion markers were then inserted in the existing map and the recombination fractions between markers were reestimated similar to the approach used by Wang et al. . As a result, 205 markers (16.63%) were mapped onto the final map with a distribution on every LG, similar to the distribution of all markers. In addition to increasing the quantity of markers on the map, the genome coverage of the map increased. The presence of segregation distortion markers will not affect the use of this map for applications such as QTL mapping. Xu  showed that distorted markers can be used for QTL mapping with no detrimental effect on the results and can be beneficial if used properly. Zhang et al.  showed that segregation distortion could result in higher genetic variance than non-distortion and help to improve the detection of linked QTLs because distortion markers do not have a large effect on the position or effect estimations of QTL analysis. A new method of QTL mapping that uses markers for segregation distortion was developed by Xu and Hu .
Future applications for the genetic map
To our knowledge, the genetic map presented in this paper is the densest map to date for sesame, though it is still not saturated, because it has 15 LGs, not 13 LGs as was expected. The map spans 1,474.87 cM with an average number of 82.20 markers per LG with an average distance of 1.20 cM between adjacent markers. The average distance in this map is much less than the 4.25 cM previously reported by Wei et al. . More importantly, 93.03% of the markers on this genetic map are SNPs, the most abundant type of genetic variation between individuals. SNPs are sequence tagged markers with codominant inheritance so they are suitable for comparative genomic studies  and association mapping [40, 41]. The results of this study not only provide mass markers for sesame, but also provide data useful for gene/QTL fine mapping, map-based gene isolation, and molecular breeding. Because these high-density linkage groups were constructed based on molecular markers developed at the whole genome level, they will serve as a reference for positioning sequence scaffolds on the physical map to assist in the assembly process of the sesame genome sequence.
We report the first high-density genetic map for sesame. The map was constructed using an F2 population and was based on polymorphic markers developed using the SLAF-seq approach, which allowed the efficient development of a large number of markers in a short time. The results of this study will not only provide a platform for gene/QTL fine mapping, map-based gene isolation, and molecular breeding for sesame, but will also provide a reference to help position sequence scaffolds on the physical map and assist in the process of assembling the sesame genome sequence.
Plant material and DNA extraction
The F2 mapping population consisted of 107 individuals from a cross of 'Zhongzhi No. 13’ (female parent) and 'Shandong Jiaxiang Sesame’ (male parent) grown at the Oil Crops Research Institute of the Chinese Academy of Agricultural Sciences in Wuhan. Young healthy leaves from the two parents and F2 individuals were collected, frozen in liquid nitrogen, and used for DNA extraction. Total genomic DNA was prepared from each plant according to the cetyltrimethylammonium bromide (CTAB) method  with some modification to the components of the CTAB buffer (8.18 g sodium chloride and 2 g CTAB in a total volume of 100 ml of 20 mM EDTA, 100 mM Tris, pH 8.0). DNA concentration and quality were estimated with an ND-1000 spectrophotometer (NanoDrop, Wilmington, DE, USA) and by electrophoresis in 0.8% agarose gels with a lambda DNA standard.
SLAF library construction and high–throughput sequencing
The procedure was performed as described by Sun et al.  with small modifications. Briefly, a pilot SLAF experiment was performed to establish conditions to optimize SLAF yield, avoid repetitive SLAFs, and obtain an even distribution of SLAFs for maximum SLAF-seq efficiency. Based on the result of the pilot experiment, the SLAF library was constructed as following. Genomic DNA was first incubated at 37°C with MseI [New England Biolabs (NEB), Ipswich, MA, USA], T4 DNA ligase (NEB), ATP (NEB), and MseI adapter. Restriction/ligation reactions were heat-inactivated at 65°C and digested with EcoRI and BfaI restriction enzymes at 37°C. Then, polymerase chain reactions (PCR) were carried out in the reaction solutions containing the diluted restriction/ligation samples, dNTP, Taq DNA polymerase (NEB), and MseI-primer containing barcode 1. PCR products were purified using an E.Z.N.A.® Cycle Pure Kit (Omega Bio-Tek, Norcross, GA, USA) and pooled. Pooled samples were incubated at 37°C with MseI, T4 DNA ligase, ATP, and Solexa adapter, purified using a Quick Spin column (Qiagen, Hilden, Germany), and run on a 2% agarose gel. Fragments of 400–450 bp (with indices and adaptors) were isolated using a Gel Extraction Kit (Qiagen) and subjected to PCR amplification with Phusion Master Mix (NEB) and Solexa Amplification primer mix (Illumina, Inc., San Diego, CA, USA) to add barcode 2 according to the Illumina sample preparation guide. After samples were gel purified, DNA fragments (SLAFs) of 400–450 bp were excised and diluted for pair-end sequencing on an Illumina High-seq 2000 sequencing platform (Illumina, Inc; San Diego, CA, U.S.) at Biomarker Technologies Corporation in Beijing (http://www.biomarker.com.cn/english/). Real-time monitoring was performed for each cycle during sequencing, the ratio of high quality reads with quality scores greater than Q20 (means a quality score of 20, indicating a 1% chance of an error, and thus 99% confidence) in the raw reads and guanine-cytosine (GC) content were calculated for quality control.
SLAF-seq data grouping and genotype definition
All SLAF pair-end reads with clear index information were clustered based on sequence similarity as detected by BLAT  (-tileSize = 10 -stepSize = 5). Sequences with over 90% identity were grouped in one SLAF locus as described by Sun et al. . Alleles were defined in each SLAF using the minor allele frequency (MAF) evaluation. Because sesame is a diploid species, one locus contains at most four SLAF tags, so groups containing more than four tags were filtered out as repetitive SLAFs. In this study, SLAFs with a sequence depth of less than 107 were defined as low-depth SLAFs and were filtered out. SLAFs with 2, 3, or 4 tags were identified as polymorphic SLAFs and considered to be potential markers. Polymorphic markers were classified into eight segregation patterns (ab × cd, ef × eg, hk × hk, lm × ll, nn × np, aa × bb, ab × cc and cc × ab). An F2 population is obtained by selfing the F1 of a cross between two fully homozygous parents with genotype aa or bb. Therefore, the study only used the SLAF markers which segregation patterns were aa × bb for genetic map construction. The average sequence depths of SLAF markers were greater than 20-fold in parents and greater than 14-fold in progeny. Any a progeny contained more than 80% of the SLAF markers in the parents, ie, 80% integrity of SLAF markers in individuals.
Segregation distortion analysis and genetic map construction
Marker segregation ratios were calculated using the chi-square test. Markers showing significant (P < 0.05) segregation distortion were initially excluded from the map construction and were then added later as accessory markers. A region on the map with more than three adjacent loci that showed significant (P < 0.05) segregation distortion was defined as a segregation distortion region (SDR) . The recombination rates between markers were calculated using JoinMap 4.0 software  and the genetic map was constructed using a logarithm of odds (LOD) threshold ≥4.0 and a maximum recombination fraction of 0.4. Map distances in centi-Morgans were calculated using the Kosambi mapping function .
This work was supported by the National Natural Science Foundation of China (no. 31271766), the National Basic Research Program of China (973 Program) (no. 2011CB109304), Central Public-interest Scientific Institution Basal Research Fund and China Agriculture Research System (no. CARS-15).
- Bedigian D, Harlan J: Evidence for cultivation on sesame in the ancient world. Econ Bot. 1986, 40: 137-154. 10.1007/BF02859136.View ArticleGoogle Scholar
- Wei LB, Zhang HY, Zheng YZ, Miao HM, Zhang TZ, Guo WZ: A genetic linkage map construction for sesame (sesamum indicum L.). Genes Genom. 2009, 31 (2): 199-208. 10.1007/BF03191152.View ArticleGoogle Scholar
- Petroli CD, Sansaloni CP, Carling J, Steane DA, Vaillancourt RE, Myburg AA, da Silva OB, Pappas GJ, Kilian A, Grattapaglia D: Genomic characterization of DArT markers based on high-density linkage analysis and physical mapping to the eucalyptus genome. PLoS One. 2012, 7 (9): e44684-10.1371/journal.pone.0044684.PubMedPubMed CentralView ArticleGoogle Scholar
- Esteras C, Gomez P, Monforte AJ, Blanca J, Vicente-Dolera N, Roig C, Nuez F, Pico B: High-throughput SNP genotyping in cucurbita pepo for map construction and quantitative trait loci mapping. BMC Genomics. 2012, 13: 80-10.1186/1471-2164-13-80.PubMedPubMed CentralView ArticleGoogle Scholar
- Song W, Pang R, Niu Y, Gao F, Zhao Y, Zhang J, Sun J, Shao C, Liao X, Wang L, et al: Construction of high-density genetic linkage maps and mapping of growth-related quantitative trail loci in the Japanese flounder (Paralichthys olivaceus). PLoS One. 2012, 7 (11): e50404-10.1371/journal.pone.0050404.PubMedPubMed CentralView ArticleGoogle Scholar
- Wang Y, Sun S, Liu B, Wang H, Deng J, Liao Y, Wang Q, Cheng F, Wang X, Wu J: A sequence-based genetic linkage map as a reference for Brassica rapa pseudochromosome assembly. BMC Genomics. 2011, 12: 239-10.1186/1471-2164-12-239.PubMedPubMed CentralView ArticleGoogle Scholar
- Ren Y, Zhao H, Kou Q, Jiang J, Guo S, Zhang H, Hou W, Zou X, Sun H, Gong G, et al: A high resolution genetic map anchoring scaffolds of the sequenced watermelon genome. PLoS One. 2012, 7 (1): e29453-10.1371/journal.pone.0029453.PubMedPubMed CentralView ArticleGoogle Scholar
- Bindler G, Plieske J, Bakaher N, Gunduz I, Ivanov N, Van der Hoeven R, Ganal M, Donini P: A high density genetic map of tobacco (Nicotiana tabacum L.) obtained from large scale microsatellite marker development. Theor Appl Genet. 2011, 123 (2): 219-230. 10.1007/s00122-011-1578-8.PubMedPubMed CentralView ArticleGoogle Scholar
- Troggio M, Malacarne G, Coppola G, Segala C, Cartwright DA, Pindo M, Stefanini M, Mank R, Moroldo M, Morgante M, et al: A dense single-nucleotide polymorphism-based genetic linkage map of grapevine (Vitis vinifera L.) anchoring Pinot Noir bacterial artificial chromosome contigs. Genetics. 2007, 176 (4): 2637-2650. 10.1534/genetics.106.067462.PubMedPubMed CentralView ArticleGoogle Scholar
- Wang W, Huang S, Liu Y, Fang Z, Yang L, Hua W, Yuan S, Liu S, Sun J, Zhuang M, et al: Construction and analysis of a high-density genetic linkage map in cabbage (Brassica oleracea L. var. capitata). BMC Genomics. 2012, 13: 523-10.1186/1471-2164-13-523.PubMedPubMed CentralView ArticleGoogle Scholar
- Liu J, Huang S, Sun M, Liu S, Liu Y, Wang W, Zhang X, Wang H, Hua W: An improved allele-specific PCR primer design method for SNP marker analysis and its application. Plant Methods. 2012, 8 (1): 34-10.1186/1746-4811-8-34.PubMedPubMed CentralView ArticleGoogle Scholar
- Miller MR, Dunham JP, Amores A, Cresko WA, Johnson EA: Rapid and cost-effective polymorphism identification and genotyping using restriction site associated DNA (RAD) markers. Genome Res. 2007, 17 (2): 240-248. 10.1101/gr.5681207.PubMedPubMed CentralView ArticleGoogle Scholar
- Baird NA, Etter PD, Atwood TS, Currey MC, Shiver AL, Lewis ZA, Selker EU, Cresko WA, Johnson EA: Rapid SNP discovery and genetic mapping using sequenced RAD markers. PLoS One. 2008, 3 (10): e3376-10.1371/journal.pone.0003376.PubMedPubMed CentralView ArticleGoogle Scholar
- Baxter SW, Davey JW, Johnston JS, Shelton AM, Heckel DG, Jiggins CD, Blaxter ML: Linkage mapping and comparative genomics using next-generation RAD sequencing of a non-model organism. PLoS One. 2011, 6 (4): e19315-10.1371/journal.pone.0019315.PubMedPubMed CentralView ArticleGoogle Scholar
- Chutimanitsakun Y, Nipper RW, Cuesta-Marcos A, Cistue L, Corey A, Filichkina T, Johnson EA, Hayes PM: Construction and application for QTL analysis of a restriction site associated DNA (RAD) linkage map in barley. BMC Genomics. 2011, 12: 4-10.1186/1471-2164-12-4.PubMedPubMed CentralView ArticleGoogle Scholar
- Wang N, Fang L, Xin H, Wang L, Li S: Construction of a high-density genetic map for grape using next generation restriction-site associated DNA sequencing. BMC Plant Biol. 2012, 12: 148-10.1186/1471-2229-12-148.PubMedPubMed CentralView ArticleGoogle Scholar
- Peterson BK, Weber JN, Kay EH, Fisher HS, Hoekstra HE: Double digest RADseq: an inexpensive method for de novo SNP discovery and genotyping in model and non-model species. PLoS One. 2012, 7 (5): e37135-10.1371/journal.pone.0037135.PubMedPubMed CentralView ArticleGoogle Scholar
- Poland JA, Brown PJ, Sorrells ME, Jannink JL: Development of high-density genetic maps for barley and wheat using a novel two-enzyme genotyping-by-sequencing approach. PLoS One. 2012, 7 (2): e32253-10.1371/journal.pone.0032253.PubMedPubMed CentralView ArticleGoogle Scholar
- Sun X, Liu D, Zhang X, Li W, Liu H, Hong W, Jiang C, Guan N, Ma C, Zeng H, et al: SLAF-seq: an efficient method of large-scale De novo SNP discovery and genotyping using high-throughput sequencing. PLoS One. 2013, 8 (3): e58700-10.1371/journal.pone.0058700.PubMedPubMed CentralView ArticleGoogle Scholar
- Ercan AG, Taskin M, Turgut K: Analysis of genetic diversity in Turkish sesame (Sesamum indicum L.) populations using RAPD markers. Genet Resour Crop Ev. 2004, 51 (6): 599-607.View ArticleGoogle Scholar
- Pham TD, Bui TM, Werlemark G, Bui TC, Merker A, Carlsson AS: A study of genetic diversity of sesame (Sesamum indicum L.) in Vietnam and Cambodia estimated by RAPD markers. Genet Resour Crop Ev. 2009, 56 (5): 679-690. 10.1007/s10722-008-9393-z.View ArticleGoogle Scholar
- Kim DH, Zur G, Danin-Poleg Y, Lee SW, Shim KB, Kang CW, Kashi Y: Genetic relationships of sesame germplasm collection as revealed by inter-simple sequence repeats. Plant Breed. 2002, 121 (3): 259-262. 10.1046/j.1439-0523.2002.00700.x.View ArticleGoogle Scholar
- Kumar V, Sharma SN: Comparative potential of phenotypic, ISSR and SSR markers for characterization of sesame (Sesamum indicum L.) varieties from India. J Crop Sci Biotech. 2011, 14: 163-171. 10.1007/s12892-010-0102-z.View ArticleGoogle Scholar
- Laurentin HE, Karlovsky P: Genetic relationship and diversity in a sesame (Sesamum indicum L.) germplasm collection using amplified fragment length polymorphism (AFLP). BMC Genet. 2006, 7: 10-PubMedPubMed CentralView ArticleGoogle Scholar
- Laurentin H, Karlovsky P: AFLP fingerprinting of sesame (Sesamum indicum L.) cultivars: identification, genetic relationship and comparison of AFLP informativeness parameters. Genet Resour Crop Ev. 2007, 54 (7): 1437-1446. 10.1007/s10722-006-9128-y.View ArticleGoogle Scholar
- Zhang YX, Zhang XR, Hua W, Wang LH, Che Z: Analysis of genetic diversity among indigenous landraces from sesame (Sesamum indicum L.) core collection in China as revealed by SRAP and SSR markers. Genes Genom. 2010, 32 (3): 207-215. 10.1007/s13258-009-0888-6.View ArticleGoogle Scholar
- Zhang Y, Zhang X, Che Z, Wang L, Wei W, Li D: Genetic diversity assessment of sesame core collection in China by phenotype and molecular markers and extraction of a mini-core collection. BMC Genet. 2012, 13: 102-PubMedPubMed CentralView ArticleGoogle Scholar
- Dixit A, Jin MH, Chung JW, Yu JW, Chung HK, Ma KH, Park YJ, Cho EG: Development of polymorphic microsatellite markers in sesame (Sesamum indicum L.). Mol Ecol Notes. 2005, 5 (4): 736-738. 10.1111/j.1471-8286.2005.01048.x.View ArticleGoogle Scholar
- Wei W, Qi X, Wang L, Zhang Y, Hua W, Li D, Lv H, Zhang X: Characterization of the sesame (Sesamum indicum L.) global transcriptome using Illumina paired-end sequencing and development of EST-SSR markers. BMC Genomics. 2011, 12: 451-10.1186/1471-2164-12-451.PubMedPubMed CentralView ArticleGoogle Scholar
- Zhang H, Wei L, Miao H, Zhang T, Wang C: Development and validation of genic-SSR markers in sesame by RNA-seq. BMC Genomics. 2012, 13: 316-10.1186/1471-2164-13-316.PubMedPubMed CentralView ArticleGoogle Scholar
- Wang L, Zhang Y, Qi X, Gao Y, Zhang X: Development and characterization of 59 polymorphic cDNA-SSR markers for the edible oil crop Sesamum indicum (Pedaliaceae). Am J Bot. 2012, 99 (10): e394-398. 10.3732/ajb.1200081.PubMedView ArticleGoogle Scholar
- Zhang YX, Sun JA, Zhang XR, Wang LH, Che Z: Analysis on genetic diversity and genetic basis of the main sesame cultivars released in China. Agr Sci China. 2011, 10 (4): 509-518. 10.1016/S1671-2927(11)60031-X.View ArticleGoogle Scholar
- Faris JD, Laddomada B, Gill BS: Molecular mapping of segregation distortion loci in Aegilops tauschii. Genetics. 1998, 149 (1): 319-327.PubMedPubMed CentralGoogle Scholar
- Karkkainen K, Koski V, Savolainen O: Geographical variation in the inbreeding depression of Scots pine. Evolution. 1996, 50 (1): 111-119. 10.2307/2410785.View ArticleGoogle Scholar
- Wang C, Zhu C, Zhai H, Wan J: Mapping segregation distortion loci and quantitative trait loci for spikelet sterility in rice (Oryza sativa L.). Genet Res. 2005, 86 (2): 97-106. 10.1017/S0016672305007779.PubMedView ArticleGoogle Scholar
- Xu S: Quantitative trait locus mapping can benefit from segregation distortion. Genetics. 2008, 180 (4): 2201-2208. 10.1534/genetics.108.090688.PubMedPubMed CentralView ArticleGoogle Scholar
- Zhang L, Wang S, Li H, Deng Q, Zheng A, Li S, Li P, Li Z, Wang J: Effects of missing marker and segregation distortion on QTL mapping in F2 populations. Theor Appl Genet. 2010, 121 (6): 1071-1082. 10.1007/s00122-010-1372-z.PubMedView ArticleGoogle Scholar
- Xu S, Hu Z: Mapping quantitative trait Loci using distorted markers. Int J Plant Genomics. 2009, 2009: 410825-PubMedPubMed CentralGoogle Scholar
- Luo MC, Deal KR, Akhunov ED, Akhunova AR, Anderson OD, Anderson JA, Blake N, Clegg MT, Coleman-Derr D, Conley EJ, et al: Genome comparisons reveal a dominant mechanism of chromosome number reduction in grasses and accelerated genome evolution in Triticeae. Proc Natl Acad Sci USA. 2009, 106 (37): 15780-15785. 10.1073/pnas.0908195106.PubMedPubMed CentralView ArticleGoogle Scholar
- Cogan NO, Ponting RC, Vecchies AC, Drayton MC, George J, Dracatos PM, Dobrowolski MP, Sawbridge TI, Smith KF, Spangenberg GC, et al: Gene-associated single nucleotide polymorphism discovery in perennial ryegrass (Lolium perenne L.). Mol Genet Genomics. 2006, 276 (2): 101-112. 10.1007/s00438-006-0126-8.PubMedView ArticleGoogle Scholar
- Chan EK, Rowe HC, Kliebenstein DJ: Understanding the evolution of defense metabolites in Arabidopsis thaliana using genome-wide association mapping. Genetics. 2010, 185 (3): 991-1007. 10.1534/genetics.109.108522.PubMedPubMed CentralView ArticleGoogle Scholar
- Doyle JJ, Doyle JL: A rapid DNA isolation procedure for small quantities of fresh leaf tissue. Phytochem Bull. 1987, 19: 11-15.Google Scholar
- Kent WJ: BLAT–the BLAST-like alignment tool. Genome Res. 2002, 12 (4): 656-664.PubMedPubMed CentralView ArticleGoogle Scholar
- Paillard S, Schnurbusch T, Winzeler M, Messmer M, Sourdille P, Abderhalden O, Keller B, Schachermayr G: An integrative genetic linkage map of winter wheat (Triticum aestivum L.). Theor Appl Genet. 2003, 107 (7): 1235-1242. 10.1007/s00122-003-1361-6.PubMedView ArticleGoogle Scholar
- Stam P: Construction of integrated genetic linkage maps by means of a new computer package, join map. Plant J. 1993, 3: 739-744. 10.1111/j.1365-313X.1993.00739.x.View ArticleGoogle Scholar
- Kosambi DD: The estimation of map distance from recombination values. Ann Eugen. 1944, 12: 172-175.View ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.