Quantitative trait loci (QTL) analysis of leaf related traits in spinach (Spinacia oleracea L.)

Background Spinach (Spinacia oleracea L.) is an important leafy vegetable crop, and leaf-related traits including leaf length, leaf width, and petiole length, are important commercial traits. However, the underlying genes remain unclear. The objective of the study was to conduct QTL mapping of leaf-related traits in spinach. Results A BC1 population was used to construct the linkage map and for QTL mapping of leaf length, leaf width, petiole length, and the ratio of leaf length to width in 2015 and 2019. Two genetic linkage maps were constructed by specific locus amplified fragment sequencing (SLAF-seq), and kompetitive allele specific PCR (KASP) technology, respectively using BC1 population in 2015. Based on the results of 2015, the specific linkage groups (LG) detected QTLs were generated using BC1 population in 2019. A total of 13 QTLs were detected for leaf-related traits, only five QTLs being repeatedly detected in multiple years or linkage maps. Interestingly, the major QTLs of leaf length, petiole length, and the ratio of leaf length to width were highly associated with the same SNP markers (KM3102838, KM1360385 and KM2191098). A major QTL of leaf width was mapped on chromosome 1 from 41.470−42.045 Mb. And 44 genes were identified within the region. Based on the GO analysis, these genes were significantly enriched on ribonuclease, lyase activity, phosphodiester bond hydrolysis process, and cell wall component, thus it might change cell size to determine leaves shape. Conclusions Five QTLs for leaf-related traits were repeatedly detected at least two years or linkage maps. The major QTLs of leaf length, petiole length, and the ratio of leaf length to width were mapped on the same loci. And three genes (Spo10792, Spo21018, and Spo21019) were identified as important candidate genes for leaf width. Supplementary Information The online version contains supplementary material available at 10.1186/s12870-021-03092-5.


Background
Spinach (Spinacia oleracea L.) is an economically significant leafy vegetable that is grown worldwide. It is also regarded as one of the most nutritious vegetables due to its high quantity of substances that are beneficial to human health, including vitamins A, E, C, K, lutein, folic acid, oxalic acid, calcium, iron phosphorous and potassium [1][2][3]. Spinach originated from middle-east (possibly Iran) and has been cultivated for over two thousand years. China began cultivating spinach during the seventh century, which is earlier than Europe and United States [4]. China is the largest producer, followed by USA and Japan [2]. In 2014, the global production of spinach is estimated to be approximately 24.3 million tones, 91 % of which is produced in China [5].
Spinach is a diploid species which belongs to the Amaranthaceae family and commonly defined as dioecious, but there are occasionally monoecious species [6,7]. Leaf traits such as leaf type (savoy, semi-savoy, and smooth type), leaf length and width, leaf erectness, petiole length and color, and edge shape, are regarded as important agronomic characteristics making a significant impact on spinach breeding. Erect leaves, for example, are more likely to accommodate high-density spinach production and mechanical harvesting. Additionally, savoy and semi-savoy leaf types of spinach are generally suitable for fresh-market consumption while smooth types are prevalent for freeze products and salad [3,8]. Such traits are typical quantitative traits controlled by multiple genes and can also be significantly influenced by environmental conditions [9]. Until now, only a few reports have been published associating leaf-related traits with molecular markers in spinach. Ma et al. (2016) [3] performed association mapping of surface texture, edge shape, and petiole color of spinach using genotyping-by-sequencing (GBS) technology and found 5, 7, and 14 single nucleotide polymorphism (SNP) markers were associated with surface texture, edge shape, and petiole color, respectively. More recently, Cai et al. (2018) [5] used GBS technology and QTL mapping on leaf color (red/green). The authors found that one major QTL accounted for 69.3 % of phenotypic variation. However, the QTLs of leaf type (length and width) and petiole length are still unclear. Thus, mapping of the QTLs could have a significant influence on spinach improvement.
Genetic linkage maps are a powerful genomic tool, which have been widely used for QTL mapping, gene mapping, whole-genome assembly, and marker-assisted selection (MAS) [10]. To date, five genetic linkage maps of spinach have been reported. The first genetic map contained 101 amplified fragment length polymorphism (AFLP) and 9 simple sequence repeats (SSR) that were generated using PCR-based markers [11]. This map was divided into seven linkage groups, spanning 585 cM, with an average of 5.18 cM between adjacent markers, and it was used for analyzing the location of a sexdetermining locus [11]. The second genetic map was 433.6 cM and was generated with 283 SNP markers using RNA sequencing [12]. The map was divided into six linkage groups, consistent with the number of spinach chromosomes, and 39 QTLs associated with nitrogen use efficiency in spinach were identified using the linkage map [12]. The third genetic map was constructed using specific locus amplified fragment sequencing (SLAF-seq) technology and 4,080 SNP markers and spanning 11,125.97 cM, with an average distance of 0.31 cM between the adjacent markers [13]. The fourth genetic map was constructed by Xu et al. (2017) [14], and it contained six linkage groups, and 463 Mb spinach genome scaffolds were found to be anchored to the genetic map with 870 SNP markers. Recently, Cai et al. (2018) [5] constructed an updated high-density genetic map to map leaf color (ref/green). The map contained six linkage groups spanning 1539.96 cM, and average marker interval was 0.4 cM, as measured using GBS technology.
The type and number of polymorphic DNA markers play an important role in constructing a high-density genetic linkage map. Until now, various types of DNA markers have been discovered, including restriction fragment length polymorphism (RFLP), randomly amplified polymorphic DNA (RAPD), AFLP, SSR, and SNP [15,16]. SNP are the most common type of DNA markers, which have a high abundance and can support costeffectiveness and rapid screening processing [17]. KASP is a PCR-based homogeneous fluorescent SNP genotyping technology that can discriminate allele gene hinge on different fluorescent (e.g., FAM and HEX fluorescent) [18]. With the advantages of cost-effectiveness, adaptability, and efficiency, this technology is widely used on many species, including wheat [19], tomato [20], and maize [21].
In the study, high-density spinach genetic map [13] was used to map the QTLs of leaf length (LL), leaf width (LW), petiole length (PL), and the ratio of leaf length to width (LR). Additionally, in order to verify the authenticity of SLAF markers, we constructed a genetic linkage map using SLAF markers that was based on KASP technology and attempted to use the linkage map to map the four traits. Our objective was to develop DNA molecular markers for MAS in spinach that could be used for the improvement of the crop and future research on spinach.

Identification of SNP markers and genotyping
In order to validate the accuracy of 4,080 SLAF markers from SLAF-seq technology (Table S1) [13], we evenly chosen 300 SLAF markers from the six high-density linkage groups to construct a linkage map with evenlydistributed markers that were based on KASP technology. The markers were used to genotype the BC 1 individuals. Of these 300 markers, 119 markers were not available due to a lack of segregation, distorted segregation, or signal. Therefore, the remaining 181 available markers were used to generate linkage map (Fig. 1).

Construction of linkage map
To develop an SNP-based genetic linkage map, the 181 informative SNP markers and the 147 BC 1 individuals from 2015 were used for linkage analysis using Join-Map4.0 software. All of the markers were mapped onto the genetic map that was divided into six linkage groups (LG1 to LG6), which is consistent with the number of spinach chromosomes ( Fig. 1 and Table S2). The total size of the linkage map was 585.45 cM with an average interval of 3.23 cM. The linkage group containing the maximum numbers of markers was LG1, where there were 68 SNP markers, and it spanned 96.29 cM. The LG4 had a length of 109.911 cM and included 18 markers, the minimum number of markers among the six linkage groups. Some gaps existed in LG1, LG4 and LG5 due to a lack of enough evenly-distributed markers, but the linkage groups with evenly-distributed markers also observed like LG2 and LG3. Based on the results of QTLs using BC 1 population from 2015 (Figs. 2 and 3), the markers located on the LG3 and LG5 were used to generate genetic map and attempt to map the four traits using BC 1 population from 2019 (Table S3). Analysis of phenotypic data of BC 1 population Leaf-related traits of BC 1 lines are summarized in Table 1. As for the individuals in 2015, the LL varied widely, ranging from 9.80 to 18.25 cm, with an average of 13.85 cm. LW ranged from 5.00 to 9.45 cm, with a mean of 6.80 cm. PL ranged from 2.45 to 6.50 cm, with an average of 4.45 cm. The BC 1 lines in 2019 shared higher value of LL, LW, and PL relative to the individuals in 2015 (Table S4)    For the LL, four QTLs (qLL5.1, qLL5.2, 1LL5.3, and qLL3.1) were identified and were distributed on LG5 and LG3. Only qLL5.3 was repeatedly detected on the three linkage maps and had the LOD score ranging from 6.61 to 24.58 and could explain 14.2−50.7 % of the phenotypic variation. Based on the results from the three linkage maps, three closest markers, Marker3102838, KM2191098, and KM1360385, were located on 76.692 −77.340 cM region significant associated with qLL5.3 (Fig. 3).
Three QTLs for LW were found: qLW3.1, qLW3.2, and qLW3.3. qLW3.3, a major QTLs, was repeatedly detected on two linkage maps in 2015 while a minor QTL qLW3.1 was repeatedly found on the three linkage maps. The qLW3.3, close to two adjacent markers Marker3677664 and KM41831444, had the LOD score of 3.9−4.434 and explained 9−9.3 % of the phenotypic variation. The minor LW QTLs, close to marker KM3309304 (Marker3309304), had an LOD score of 2.02−3.72 and explained 5.7−6.9 % of the phenotypic variation.
Only two QTLs (qPL5.1, and qPL5.2) were found for PL, only qPL5.2 was repeatedly identified on the three linkage maps and it contained an LOD score of 5.06 −12.14. This QTL (qPL5.2) was detected on LG5 and had a peak at two adjacent markers KM2191098 and KM3102838 (Marker3102838), and explained 16.5 −31.6 % of the phenotypic variation and 0.67−1.84 additive effect.

Prediction and analysis of candidate genes
Based on the genome annotation information, the genes within the QTL confidence intervals could be identified.
For the LL, LR and PL locus, two genes and nine genes were identified in scaffold SpoScf_01046 and SpoScf_ 00704, respectively, while no genes were found in SpoScf_24795 (Table S5). All of the genes encoded BNR/Asp-box repeat family protein, Leucine-rich repeat, protein kinase, etc. (Table S5). As for the LW, 44 genes were found of the major QTL qLW3.3 locus that was located on chromosome 1 from 41.470 to 42.045 Mb  (Table S6). In GO analysis, 27 out of the 44 genes were enriched in the molecular function (MF) category, 25 genes were enriched in the biological process (BP) category, and only seven gene were found in cellular component (CC) category (p value < 0.05). In the MF category, most genes were related to ribonuclease T2 activity, lyase activity, and endonuclease activity etc. (Fig. 6). In the BP category, most genes were involved in RNA phosphodiester bond hydrolysis, endonucleolytic, RNA catabolic process, and nucleic acid phosphodiester bond hydrolysis. In the CC category, the seven genes were related to cell wall (Fig. 6). Based on the annotation information of spinach reference, three genes (Spo10792, Spo21018, and Spo21019) were identified because they are involved in cell expansion ( Table 4).

Development of marker linked to the leaf-related traits
In the present study, the SNPs tightly linked to the four major QTLs, qLL5.3, qPL5.2, qLR5.2 and qLW3.3, were able to develop KASP markers for MAS. For example, 90 BC 1 individuals planted in 2020 were used to examine the accuracy of marker KM2191098, which is associated with the LL, PL, and LR. As shown in Fig. 7a, KASP genotype assay analysis (see "Materials and methods") showed that the 90 lines could be obviously separated two groups: T:G and T:T genotype, indicating that KM2191098 is an available marker. And the detailed information of genotype and phenotype were summarized in Table S7. The primer sequence of marker KM2191098 was summarized in Table S8. Otherwise, comparison of the phenotype between T:G and T:G in LL, PL, and LR, the two genotypes shared significant difference in the three traits (Fig. 7b, c, d). The individuals with T:G genotype, for instance, shared longer leaf length in comparison to the T:T. Therefore, these results demonstrated that the marker KM2191098 linked to the LL, PL, and LR could be used for MAS.

Discussion
Leaf traits are very important because they affect how leaves capture light for photosynthesis [22]. Until now, there have not been many studies related to leaf or petiole traits in spinach [3,9,23]. However, QTLs associated with LL, LW, and PL in spinach remain unreported.
In the study, a high-density genetic map constructed by Qian et al. 2017 and two genetic maps were generated using KASP genotyping assay were used to map QTLs for LL, LW, PL, and LR. We identified four QTLs associated with LL (qLL5.1, qLL5.2, 1LL5.3, and qLL3.1), three QTLs associated with LW (qLW3.1, qLW3.2, and qLW3.3), two QTLs related to PL (qPL5.1, and qPL5.2), and four QTLs for LR (qLR5.1, qLR5.2, qLR3.1, and qLR3.2). Interestingly, the qLL5.3, was located in the same region as the major QTLs qPL5.2 and qLR5.2, suggesting the LL is correlated with PL or LR, which is consistent with the correlation in Table 2. Among them, only five QTLs (qLL5.3, qPL5.2, qLR5.2, qLW3.3, and qLW3.1) were repeatedly detected at least on two linkage maps (Figs. 2 and 3). Two reasons were considered to account for the fact that only minority QTLs were able to detect at different linkage maps. On the one hand, the differences in QTL numbers, position might be arisen from environments effects. On the other hand, different population, linkage maps, and even the number of markers could also affect QTLs [24,25]. For example, the QTL qLR5.1 was only detected on the high-density linkage map while qLR5.2, close to qLR5.1, was able to be repeatedly detected on the three different linkage maps (Figs. 2 and 3), thus we speculated that the two QTLs might be the same one. Therefore, these QTLs were not able to be repeatedly detected in multiple years or linkage maps.
Until now, many genes involved in determining leaf shape and size have been reported. For example, in Arabidopsis thaliana, brassinosteroid-responsive RING-H2 (BRH1) gene, contains highly conserved RING finger domain and was able to change the leaves shape [26]. Big brother (BB) was able to greatly reduce leaf size [27]. WOX5, one of the WUSCHEL-related homeobox family, could acts redundantly with WOX1 and WOX3 to control leaf shape [28]. Many investigations on leaf shape and size have also been conducted in rice. NARROW LEAF 7 (NAL7) encodes a flavin-containing monooxygenase and results in a reduced leaf width mediated by auxin [29]. Narrow and Rolled Leaf 1 (NRL1) encodes the cellulose synthase-like protein D4, and Hu et al.
Taken together, the genes involved in organ growth, development, or hormone transport are likely to change the leaves shape. In the present study, the major QTLs of LL, PL, and LR were mapped on three scaffolds (SpoScf_00704, SpoScf_24795 and SpoScf_01046) as the incompleteness of the spinach genome assembly. Eleven genes were identified from the three scaffolds and detailed information were list in Table S5. Moreover, the major QTL qLW3.3 was located at 41.470−42.045 Mb on chromosome 1, and 44 genes were identified within the region (Table S6). According to the GO analysis, the 44 genes were mainly enriched on ribonuclease, lyase activity, phosphodiester bond hydrolysis, and cell wall (Fig. 6), thus we hypothesized that the leaf width might be changed due to cell expansion as previously described that cell expansion can determine leaf final size and shape after their basic shape is established [32]. Furthermore, based on the annotation of the spinach reference genome (http://www.spinachbase.org), three genes (Spo10792, Spo21018, and Spo21019), involved in cell expansion, were selected as potential candidate genes (Table 4). Further work is required to verify this result.
In recent years, molecular markers were prevalent for many crop breeding programs due to it could improve breeding efficiency and accelerate breeding progress. Therefore, MAS is an efficient and effective approach for breeders [33]. In the present study, based on the four major QTLs, qLL5.3, qPL5.2, qLR5.2 and qLW3.3, we could develop effective KASP markers for MAS. For example, the KASP markers KM2191098, which is associated with the LL, PL, and LR (Fig. 7). Therefore, SNP tightly linked to the four traits would be valuable for screening interest leaf shape and size in spinach.

Conclusions
Thirteen QTLs for spinach leaf-related traits were identified using SLAF-seq and KASP technology. And only five QTLs were repeatedly detected in multiple years or linkage groups. The major QTL qLW3.3 was mapped on chromosome 1 from 41.470 to 42.045 Mb. Forty-four genes were identified within the candidate region and three genes (Spo10792, Spo21018, and Spo21019) were considered to be potential candidate genes, which were involved in growth regulation or cell expansion. Interestingly, three major QTLs qLL5.3, qPL5.2, and qLR5.2 were highly associated with KM1360385, KM2191098, and KM3102838. Based on the results, one KASP marker was developed, which was significantly related to LL, PL, and LR. The findings in this study would be valuable for leaf-related traits breeding program and further fine mapping the traits in spinach.

Plant materials and DNA extraction
A 147 BC 1 mapping population was derived from across between the inbred line 12S3, a female and recurrent parent, and a male parent (inbred line 12S4). All the plant materials were generated by the spinach research group of the Institute of Vegetables and Flowers (IVF), Chinese Academy of Agriculture of Sciences (CAAS). Compared with the inbred line 12S3 (Fig. 8a), 12S4 contained a larger leaf and petiole length but smaller leaf width (Fig. 8b). The entire BC 1 population (Fig. 8c−e) and parents were cultivated in a natural environment in the experimental field of the IVF, CAAS in the spring of 2015 and 2019, respectively. Additionally, 90 BC 1 individuals used for validation the marker closely linked to leaf related traits were also planted in the experimental field of the IVF in the spring of 2020. All above individual plants were spaced 0.3 m apart and with row spacing of 0.5 m in a plot. Otherwise, the plant materials used and collected in the study comply with China's guidelines and legislation.
The fresh leaves of BC 1 individuals and two parents (until 6 true leaves emerged) were collected and then frozen in liquid nitrogen until DNA extraction. Total genomic DNA was extracted using the cetyltrimethyl ammonium bromide (CTAB) method as described by Murray and Thompson (1980) [34]. The DNA quality and concentration were assessed using electrophoresis in 1.0 % agarose gels and ND-2000 spectrophotometer (Thermo Fisher Scientific, Wilmington, DE, USA).

Discovery of SNP molecular markers and genotyping
A total of 4,080 polymorphic SLAF markers were identified through the SLAF-seq for the two parents, using methods as previously described by Qian et al. (2017). To verify the accuracy of SLAF markers using KASP technology, 300 SLAF markers, renamed "KM", followed by the SLAF markers number, were selected to design the KASP assay primer, and primers were designed by the LGC company (Shanghai, China). KASP was performed in a volume 5 µL, including 2.5 µL 2 × KASP Master mix, 0.07 µL KASP Assay mix, and 2.5 µL DNA that was diluted to 20−30 ng/µL. The KASP genotyping mixes were arrayed into a 384-well PCR plate. Notemplate controls (NTCs) were included on each plate.
All amplifications were performed on a Veriti 384 Well Thermal Cycler (Applied Biosystems, Foster City, CA, US) using the following thermal cycling conditions: 15 min at 94°C followed by thermal cycles of 20 s at 94°C and 60 s at 61°C (drop 0.6°C per cycle), 26 cycles of 20 s at 94°C and 60 s at 55°C. Next, the plate was read below 40°C in QuantStudio 12 K Flex Real-Time PCR System (Applied Biosystems, Foster City, CA, US). If sufficiently defined genotype clusters are not obtained after the initial KASP thermal cycles, an additional thermal cycle is required (three cycles of 20 s at 94°C and 60 s at 57°C). The additional thermal cycling and plate reading was performed until defined genotype clusters were attained.

Construction of linkage map
Markers were filtered out at segregation distortion, and then the available SNP markers were subjected to linkage analysis and map construction using BC 1 population from 2015 by JoinMap 4.0 software [35]. The regression mapping method was used to calculate each linkage group to order the markers. The start value of the independence LOD was changed to 0.5, and all other settings were set to the default values. As for the BC 1 population from 2019, the SNP markers located on linkage group with QTLs identified using individuals from 2015 and high-density genetic map were selected to construct genetic map to further map the four traits.

Phenotypic evaluation
Phenotypic data were collected from BC 1 individuals in 2015, 2019, and 2020. The LL, LW, and PL of outer two leaves were measured using a ruler once the individuals contained six true leaves. Frequency distribution and correlation of the LL, LW, PL, and LR were plotted using R software (version 3.5.1).

QTL analysis and candidate genes identification
QTLs for the four leaf related traits were detected via three different linkage maps: high-density genetic map generated by SLAF-seq [13], genetic map constructed by BC 1 lines from 2015 to 2019, respectively. QTL analysis was performed with MapQTL 6.0 [36] using interval mapping (IM) and the multiple QTL model (MQM) methods. The general process was (1) the LOD threshold, essential parameter for QTL, was calculated using the permutation test at the genome-wide significance level of P < 0.05, n = 1000; (2) QTL mapping was conducted using the IM method with the set step size as 1; (3) according to the result of IM mapping, the markers closest to the LOD peak that were higher than the threshold were obtained as cofactors, and MQM mapping analysis was conducted; (4) the markers nearest to the LOD peak were examined, and the set of cofactors were adjusted correspondingly. After the fourth step, we repeated the MOM mapping. (5) The markers closest to the highest LOD score were considered the QTL, and a 1.5-LOD support interval was constructed as confidence intervals by selecting the region that the LOD score on either side of the peak decreases by 1.5 LOD. We used standard QTL nomenclature: the first letter of the 'q' and trait, followed by the name of linkage group, followed by the number of QTL on the same linkage group (e.g., qLW3.2 for the second QTL of leaf width on the linkage group 3).
The QTLs were repeatedly detected at least two linkage maps were defined as the valuable QTLs. The confidence intervals from three linkage maps were merged and then considered as the finally confidence intervals. The candidate genes were categorized through gene ontology (GO) analysis using clusterProfiler [37]. The boxplots were performed using BMK Cloud platform (http://www.biocloud.net/).