Genome-wide identification of PTI1 family in Setaria italica and salinity-responsive functional analysis of SiPTI1–5

Background PTI1 (Pto-interacting 1) protein kinase belongs to the receptor-like cytoplasmic kinase (RLCK) group of receptor-like protein kinases (RLK), but lack extracellular and transmembrane domains. PTI1 was first identified in tomato (Solanum lycopersicum) and named SlPTI1, which has been reported to interact with bacterial effector Pto, a serine/threonine protein kinase involved in plant resistance to bacterial disease. Briefly, the host PTI1 specifically recognizes and interacts with the bacterial effector AvrPto, which triggers hypersensitive cell death to inhibit the pathogen growth in the local infection site. Previous studies have demonstrated that PTI1 is associated with oxidative stress and hypersensitivity. Results We identified 12 putative PTI1 genes from the genome of foxtail millet (Setaria italica) in this study. Gene replication analysis indicated that both segmental replication events played an important role in the expansion of PTI1 gene family in foxtail millet. The PTI1 family members of model plants, i.e. S. italica, Arabidopsis (Arabidopsis thaliana), rice (Oryza sativa), maize (Zea mays), S. lycopersicum, and soybean (Glycine max), were classified into six major categories according to the phylogenetic analysis, among which the PTI1 family members in foxtail millet showed higher degree of homology with those of rice and maize. The analysis of a complete set of SiPTI1 genes/proteins including classification, chromosomal location, orthologous relationships and duplication. The tissue expression characteristics revealed that SiPTI1 genes are mainly expressed in stems and leaves. Experimental qRT-PCR results demonstrated that 12 SiPTI1 genes were induced by multiple stresses. Subcellular localization visualized that all of foxtail millet SiPTI1s were localized to the plasma membrane. Additionally, heterologous expression of SiPTI1–5 in yeast and E. coli enhanced their tolerance to salt stress. Conclusions Our results contribute to a more comprehensive understanding of the roles of PTI1 protein kinases and will be useful in prioritizing particular PTI1 for future functional validation studies in foxtail millet. Supplementary Information The online version contains supplementary material available at 10.1186/s12870-021-03077-4.

Background PTI1 (Pto-interacting 1) protein kinase belongs to the receptor-like cytoplasmic kinase (RLCK) group of receptor-like protein kinases (RLK), but lack extracellular and transmembrane domains [1,2]. In plants, PTI1 play an important role in plant defense against bacterial pathogens. It was first identified in tomato and was demonstrated to specifically recognize and interact with the AvrPto effector protein injected into the plant cells by the pathogenic bacteria, thereby triggering the downstream defense response [3].
Foxtail millet (Setaria italica) was domesticated in neolithic China approximately 8700 years ago and has been regarded as an important dietary staple food in China for millennia [18,19]. It possesses attractive qualities, such as small diploid genome (~510 Mb) [20], lower repetitive DNA, short life cycle, and C4 photosynthesis [21,22]. These characteristics promote it as a model crop for exploring basic biology processes, such as plant architecture, physiology and genome evolution [23,24]. At the same time, the stresses and barren tolerance characteristics of foxtail millet make them reduced the dependence on synthetic fertilizers, pesticides, herbicides, and insecticides [25]. And millet cultivation could decrease the overreliance on the major cereals that are limited in number worldwide [23]. Especially during the hard time of COVID-19 pandemic around the world, the strategic roles of foxtail millet in stabilizing grain production, ensuring the global economy and people's livelihood are attracted more and more attentions worldwide [26,27]. Analysis of stress resistance mechanisms and quality traits of foxtail millet are important for the development of modern foxtail millet germplasms or cultivars. With the rapid development of molecular biology, the whole genome of foxtail millet has been sequenced and published, which enables better understanding of the stress response and molecular regulatory mechanisms of this crop plant [28,29].
PTI1 gene family of foxtail millet is not yet been identified. In our previous transcriptome analysis of salt stress in foxtail millet, a stress induced gene of Seita.5G023100.1 with unknown function were identified [30]. JGI/NCBI BLAST sequence analysis showed that it was a putative PTI1 protein kinase. Considering that PTI1 proteins participate in a variety of stress defense responses in several plant species such as tomato [3,7], Arabidopsis [1,8], maize [9,10], and no PTI1 was identified in foxtail millet up to now. The systematic analysis of PTI1 gene family was carried out in this study, and 12 PTI1 genes were identified. Their chromosomal locations and protein structures were predicted and analyzed. The expression patterns of 12 SiPTI1 genes were analyzed by quantitative real-time PCR (qRT-PCR). Our results showed that most SiPTI1 genes were differentially expressed in response to salt stress and oxidative stress. A key gene SiPTI1-5 that may be associated with salt stress was selected for further studies. Overexpression of SiPTI1-5 in yeast and Escherichia coli (E. coli) enhance their tolerance to salt stress.
These results could deepen our understanding of the characteristics and functions of PTI1 genes in foxtail millet, and also assist to identifies potential abiotic stress-responsive genes for improving foxtail millet and other crop species. In addition, this study is the first systematic report on the PTI1 gene family in plants, which will also provide reference for the subsequent systematic study on the function of PTI1 genes in foxtail millet. At the same time, it also provides reference for the study of PTI1 genes family in other species.

SiPTI1s identification and annotation in foxtail millet
Our transcriptome analysis of salt stress in foxtail millet revealed an over-expressed gene (Seita.5G023100.1) with unknown function [30]. JGI/NCBI BLAST sequence analysis showed that it was a putative PTI1 protein kinase. In view of the fact that PTI1 proteins participate in a variety of stress defense responses and no PTI1 was previously identified in foxtail millet, we decided to further analyze the PTI1 gene family in foxtail millet to identify those responsive to salt stress and explore their application in crop improvement.
In this study, a total of 12 putative PTI1 genes were identified in foxtail millet via genome-wide analysis ( Table 1, Additional file 1). The genes were named SiPTI1-1 to SiPTI1-12 according to their location on the chromosome. Foxtail millet has 9 chromosomes, ranging from 35.9 Mb (chromosome 6) to 58.9 Mb (chromosome 9). The physical map positions of the 12 SiPTI1 genes in the 9 chromosomes of foxtail millet are presented in Fig. 1. The specific location of each SiPTI1 gene on the chromosome was provided in the Additional file 4. However, the distribution of SiPTI1s on chromosomes was uneven, with five genes located on chromosome 5 (SiPTI1-5, SiPTI1-6, SiPTI1-7, SiPTI1-8, and SiPTI1-9) and only one gene located on chromosome 1, chromosome 3 and chromosome 7, respectively. Interestingly, chromosome 9 is the longest, but only two SiPTI1s are located on it (SiPTI1-11 and SiPTI1-12). Therefore, there was no positive correlation between the chromosome length and the number of PTI1 genes.
Their domains were further confirmed by the three databases of SMART, NCBI CDD and Pfam. Gene classification and detailed annotation are listed in Table 1. The predicted SiPTI1s protein sequences ranged from 362 amino acids (SiPTI1-4) to 727 amino acids (SiPTI1-5), and the corresponding molecular weights varied from 38.9802 to 80.9558 kDa. The predict pI varied from 6.01 to 9.26. Little differed among the 12 SiPTI1 proteins except SiPTI1-5, generally, the length of PTI1 protein kinase was about 300-400 amino acids, while SiPTI1-5 encodes 727 amino acids, and the highest molecular weight was about 81 kDa.
Phylogenetic analysis of SiPTI1s with PTI1s of other plant species The PTI1 genes have been identified in many plant species in the recent years. Based on the publicly available information and the degree of relatedness, we chose PTI1 genes from A. thaliana (At), O. sativa (Os), tobacco (Nicotiana tabacum) (Nt), Z. mays (Zm), S. lycopersicum (Sl), and G. max (Gm) to construct the phylogenetic trees with the PTI1 genes of S. italica (Si). As shown in (Fig. 2, Additional file 2), the phylogenetic analysis suggested that all PTI1 genes could be grouped into six classes and each SiPTI1 protein sequence was highly similar to their homologues in other plant species. Since a good number of the internal branches were observed to have high bootstrap values. The phylogenetic tree also revealed that the majority of foxtail millet SiPTI1 families distribution predominates with species bias, they are more closely related to those in grass species (rice and maize), in contrast, they are relatively distant relatives of the dicotyledonous Arabidopsis.
Gene structure, motif patterns analysis of PTI1 genes in foxtail millet To explore the structural diversity of SiPTI1s, the distribution of exon-intron structure was analyzed and mapped in the phylogenetic tree. As shown in Fig. 3B, two PTI1 genes (SiPTI1-9 and SiPTI1-5) contained seven introns, SiPTI1-8 and SiPTI1-10 had five introns    Multiple sequence alignments of PTI1 amino-acid sequences were performed using ClustalX, and the phylogenetic was constructed using MEGA7 by the maximum likelihood method and 1000 bootstrap replicates. The tree was divided into six phylogenetic subgroups, designated I-VI. Letters outside of the tree indicate the defined groups and SiPTI1-6 had eight introns. The rest of SiPTI1 genes had six introns. Exon-intron structural analysis indicated that members of some PTI1 subfamilies have similar exon-intron structures. Similar results were also found in maize [31] and other studies.
The motif patterns among SiPTI1s were investigated ( Fig. 3 C and Additional file 3). A total of 10 motifs were discovered and 5 of them were found to be highly conserved. In addition, all of SiPTI1s contained motifs 1, 2, 3, 4 and 5. Except for SiPTI1-10, all of other SiPTI1s contain motifs 6 and 9. Furthermore, motif 8 was found in three of the SiPTI1s members (SiPTI1-1, SiPTI1-11 and SiPTI1-12), while motif 10 was only presented in two members (SiPTI1-1, SiPTI1-11). Interestingly, the motif distribution of SiPTI1-5 was different from other members of the family, in that motifs 3, 5, 9 appear twice each. Despite the difference of motif types between groups, members within the same group such as SiPTI1-9 and SiPTI1-2, SiPTI1-8 and SiPTI1-3, SiPTI1-11 and SiPTI1-1 tend to exhibit similar motif patterns ( Fig. 3 A and C), which indicate functional similarity between them. Amino acid sequence analyses showed that the SiPTI1s contain the representative kinase domains, such as STKC_IRAK, Pkinase_Tyr, STYKc, and SPS1 (data not shown). As known that the catalytic domain of serine/threonine kinases contains 11 subdomains [31,32], the pileup analysis also showed that the 12 SiPTI1 kinases also contained the conserved 11 subdomains like known PTI1 gene of SlPTI1 in tomato ( Supplementary Fig. 2). In addition, when compared the SiPTI1s sequence of foxtail millet with the PTI1 sequences of maize and rice, we found that the catalytic domain of serine/threonine kinases also contains 11 subdomains, which were consistent with the results of SiPTI1s and SlPTI1 sequence analysis (Supplementary Fig. 3).

Cis-acting elements and subcellular localization of PTI1 genes in foxtail millet
Cis-elements analysis showed that all SiPTI1 genes promoter contained MYB, MYC and ABA-responsive (ABRE) elements. In addition, excepted for SiPTI1-12, both CGTCA-motif and TGACG-motif cis-elements were present in foxtail millet PTI1 genes family ( Fig. 4 and Additional file 5). In addition, 50% of the members had a low-temperature responsive element (LTR), and 75% contained a dehydration responsive element (DRE) ( Fig. 4 and Additional file 5). Furthermore, SiPTI1s contained a large number of cis-elements regulatory elements involved in light response, such as Sp1, G-box, and AF-box. Gibberellin-responsive elements such as Pbox and GARE-motif were also presented ( Fig. 4 and Additional file 5).
Using five publicly available subcellular localization prediction tools we found that all of the SiPTI1s were predicted to localize in the plasma membrane (Table 1). To investigate the potential role of SiPTI1-5 a vital salt tolerance-related gene of PTI1 family in the foxtail millet, we examined the subcellular localization of SiPTI1-5 fused to GFP and GFP alone (as a control) in onion epidermal cells. When observed by confocal microscopy, the green fluorescent protein (GFP) fluorescence of SiPTI1-5-GFP was distributed on the plasma membrane Duplication and divergence rates of the SiPTI1 genes Gene duplications, including segmental and tandem duplication, have long been considered as one of the main forces in the evolution and expansion of a gene family [33]. In addition, two pairs of segmentally duplicated genes were found within the SiPTI1s family (SiPTI1-4/ SiPTI1-6 and SiPTI1-1/SiPTI1-11) ( Fig. 6 and Additional file 6). To further unveil the relationship between duplication events and natural selection, the Ka and Ks values of SiPTI1s in duplicated gene pairs were calculated, and the results of Ka/Ks values were found to be less than 1, suggesting that SiPTI1 family has gone through purifying selection after gene duplications.
To further infer the phylogenetic mechanisms of foxtail millet PTI1 family, we constructed two comparative syntenic maps of foxtail millet associated with two representative species, including dicots (Arabidopsis) and monocots (rice) ( Fig. 7 and Additional file 7). A total of 2 SiPTI1 genes showed syntenic relationship with those in Arabidopsis. Moreover, we found that SiPTI1-4 and SiPTI1-7 present the same collinear gene (AT3G17410), three genes in rice had a colinear relationship with foxtail millet SiPTI1s (SiPTI1-9/Os01t0899000, SiPTI1-7/ Os01t0323100, SiPTI1-12/Os03t0226300). In addition, compared to the Arabidopsis, the PTI1s gene of foxtail millet had more colinearity with the rice PTI1 genes, and the colinearity between genomes was more abundant.

Expression patterns of SiPTI1
To investigate the tissue-specific expressions of the 12 SiPTI1 genes in foxtail millet, total RNA from roots, stems, leaves, sheaths and flowers were prepared and analyzed by qRT-PCR. As shown in Fig. 8 and additional file 9, the expressions of these SiPTI1 genes were highest in the stems and leaves, followed by the expressions in the sheaths and flowers, and lowest in the roots. Except of SiPTI1-3, SiPTI1-7, and SiPTI1-11, the expression levels of SiPTI1s family members in stems were more than five-fold higher than those in roots, and the expression levels of all SiPTI1 family members in leaves were also more than five-fold higher than that in roots. These results suggested that SiPTI1 genes may perform an important function in the stems and leaves.
To further confirm whether the expression of SiPTI1 genes were influenced by different abiotic stresses, we used qRT-PCR to monitor the expression patterns of the 12 SiPTI1 genes in plants grown under different treatments namely salinity stress induced by treatment with NaCl, NaHCO 3 , Na 2 CO 3 , and oxidative stress induced by H 2 O 2 . As shown in Fig. 9 and Additional file 9, the expressions of most of the SiPTI1 genes were responsive to abiotic stress treatment. The expression patterns of SiPTI1 genes under NaCl-stress could classified into three categories. Firstly, fluctuation change, including SiPTI1-2, SiPTI1-4, SiPTI1-6 and SiPTI1-10. The second, up-regulation expression trend, such as SiPTI1-1, SiPTI1-3, SiPTI1-5, SiPTI1-8 and SiPTI1-9. Among them, the highest expression induced by NaCl was SIPT I1-5. In addition, the expression of SiPTI1-5 reached peak when salt-stress treatment arrived at 12 h, which was about eleven-fold compare with control. The last one, down-regulation expression, including SiPTI1-7, SiPTI1-11 and SiPTI1-12. Besides, under H 2 O 2 treatment, most of SiPTI1s were induced at 12 h (Fig. 9). Under Na 2 CO 3 treatment, most of SiPTI1s were induced at 4 h and 6 h, and then down-regulated after 8 h. Moreover, except of the up-regulated SiPTI1-4, SiPTI1-6 and SiPTI1-8, other SiPTI1s were not significantly induced and/or down-regulated under Na 2 CO 3 treatment, such as SiPTI1-1 and SiPTI1-10 ( Fig. 9). In addition, under NaHCO 3 stress, SiPTI1-4 and SiPTI1-6 were significantly induced (Fig. 9). Importantly, SiPTI1-3 and SiPTI1-5 were all up-regulated under the various stress conditions. Among them, SiPTI1-5 was significantly induced up to 11.5-fold change under NaCl stress (Fig. 9).
In order to further evaluate the role of the SiPTI1-5 in salt stress, the expression of SiPTI1-5 gene was compared in 'Yugu1', salt-tolerant variety, and 'AN04', a salt-  Overexpression of SiPTI1-5 in yeast conferred tolerance to salinity In the YPD medium without salt stress, there was almost no difference between control yeast strain (transformed with pYES2) and SiPTI1-5-expressing yeast strain (transformed with pYES2-SiPTI1-5) (Fig. 11). When exposed to Na 2 CO 3 (8 mM, 10 mM) and NaHCO 3 (15 mM, 20 mM) treatment, control strain and SiPTI1-5-expressing yeast strain had no difference in plaque growth at different concentrations, indicating that the SiPTI1-5 does not confer tolerance to Na 2 CO 3 and NaHCO 3 stress in yeast, which is in agreement with the expression patterns of SiPT1-5 in response to Na 2 CO 3 and NaHCO 3 (Fig. 11). There had shown no growth differences of control and SiPTI1-5-expressing yeast under 12 mM Na 2 CO 3 and 25 mM NaHCO 3 (data were not shown). Under NaCl stress, when NaCl concentration increased to 0.6 M, the SiPTI1-5-expressing yeast strain, grew better than the control strain (Fig. 11). In summary, the SiPTI1-5 genes may be involved in response to salt stress induced by NaCl. Overexpression of SiPTI1-5 in E. coli conferred tolerance to salinity stress In order to test the relationship between SiPTI1-5 protein kinase and salt stress, the in vitro salt tolerance test was performed on control and SiPTI1-5-expressing strains (Fig. 12A). There are no significant differences in colony number between transformed E. coli harboring SiPTI1-5 and the control under normal conditions, indicating that overexpression of SiPTI1-5 did not affect the growth of E. coli recombinants in non-stress conditions. However, when grown on Luria-Bertani (LB) plates supplemented with 100 mM NaCl or higher, the number of transformed cells grew better than that of the control. Similar results were obtained in liquid LB with 250 mM NaCl, the growth rate of the SiPTI1-5-overexpressing strain was higher than that of the control strain, and it priorly arrived the logarithmic growth phase, indicating that the strain containing the pET32a-SiPTI1-5 recombinant plasmid had a certain salt-resistant ability compared with control (Fig. 12B). These results demonstrated that overexpression of SiPTI1-5 in E. coli was significantly enhanced tolerance to salt stress.

Discussion
Phylogenetic analysis revealed that SiPTI1 genes were conserved in gramineous plant species In this study, a total of 12 members of PTI1 genes family were identified from foxtail millet. All the family members have the similar molecular wight and structure characteristics except SiPTI1-5. Most of PTI1s from various plant species contain about 300-400 amino acids (aa), while SiPTI1-5 contains 727 amino acids, and its molecular weight is about 81 kDa. Previous reports showed that most of the PTI1s were composed of 300-400 aa with a molecular weight of about 40 kDa, such as GmPTI1 (366 aa) of soybean [12], SlPTI1 (370 aa) of tomato [3], OsPTI1 (368 aa) of rice [14], and CsPTI1-L (362 aa) of cucumber [13]. Whether the larger SiPTI1-5 has specific function needs to be further investigated.
The phylogenetic analysis indicated that each SiPTI1 protein sequence was similar to their homologues from gramineous rice and maize. This implied that the orthologues proteins would share similar functions from a common ancestor [34]. It revealed the species bias in the distribution of the majority of foxtail millet SiPTI1 genes in gramineous species, when compared to their homologues in dicot species. These were consistent with the present understanding of plant evolutionary history [35]. As a rational systematic approach, such phylogeny-based function prediction has been applied for prediction of stress-responsive proteins in other plant species such as rice [36] and maize [37].
New insights into the biological function of foxtail millet PTI1 genes could be inferred by combining gene expression, phylogenetic and synteny analysis, as well as comparison with the function of known PTI1 genes in model plant species. For example, SiPTI1-5 exhibited the highest homology with its orthologs in rice OsNP_ 908680 (OsPTI1b) that mediates the hypersensitive response (HR), indicating that SiPTI1-5 may share similar functions in foxtail millet. SiPTI1-3 showed high degree of similarity with ZmPTI1b and ZmPTI1a, which implied that it probably be involved in flower development and defense stress [31,38]. In addition, the multiple sequence alignment of PTI1 protein sequences implied that PTI1 were conserved among tomato, rice, maize, and foxtail millet. Especially, the kinase catalytic domain is highly conserved (Supplementary Fig. 2 and Supplementary Fig. 3).
We experimentally confirmed the predicted plasma membrane subcellular localization of SiPTI1-5 (Fig. 5). Interestingly, SiPTI1s lack predicted transmembrane structure or signal peptide. So, we speculated that its plasma membrane localization is due to interaction with the plasma membrane proteins [39]. Previous studies reported that rice OsPTI1a localizes to the plasma membrane through N-terminal palmitoylation and plays a role in immune responses via forming a complex at the plasma membrane [39]. As the phylogenetic tree branch shows that the SiPTI1 gene family members of the foxtail millet had a closely relationship with the rice and maize, it is speculated that the mechanisms of action of foxtail millet SiPTI1s may be similar to rice and maize.

The expression patterns of SiPTI1s under abiotic stresses
While essential for the growth and development of plants, excessive concentration of inorganic salts in the soil causes significant damage to the plants [40,41], ranging from ion poisoning [42,43], osmotic stress [44,45], to oxidative stress [46,47]. Salt stress is a prominent source of abiotic stress [48,49] globally as over 20% of arable land and more than 40% of irrigated land [50,51] worldwide considered to have some degree of excess salinity [52,53]. Therefore, it is particularly important to study the salt tolerance mechanisms of plants, especially for agronomic crops.
In this study, qRT-PCR analysis revealed the expression characteristics of SiPTI1 genes under diverse salinity treatments (150 mM NaCl, 100 mM NaHCO 3 , and 75 mM Na 2 CO 3 ) (Fig. 9). Among twelve SiPTI1 genes, the expression of SiPTI1-5 was obviously induced under various treatments for 12 h. It is well known that salt stress is usually accompanied by excessive accumulation of ROS, including H 2 O 2 , that causes oxidative damage to proteins, DNA and lipids [54]. ROS are also involved in the regulation of cell proliferation [55], cell defense [56], and signal transduction [54,57]. Therefore, oxidative stress is important for the study of the mechanisms of salt tolerance. Interestingly, the expression of SiPTI1-5 was induced by NaCl and H 2 O 2 , indicating that SiPTI1-5 participates in salt stress response through regulation ROS dynamic balance. It is well known that, the serine/ threonine protein kinase OXI1, mediated oxidative stress signaling. Previous research report that AtPTI1-2 could been activated by OXI1 in response to PA, H 2 O 2 , and flagellin [13]. In addition, AtPTI1-4 signals via OXI1 and MPK6 signaling cascades functioned in oxidative stress [8]. Moreover, the PTI1 genes also were induced by other stresses. For example, GmPTI1 expression was induced by salicylic acid and wounding [12], ZmPTI1-1 was dramatically induced by abscisic acid (ABA) and mannitol [58], and the CsPTI1-L of cucumber expression was induced when cucumber plants were challenged with the fungal pathogen Sphaerotheca fuliginea or with salt treatment [13]. It is well known that promoters could regulate temporal and spatial expression of gene, and cis-elements in promoters are crucial for gene function regulation by interacting with trans-acting factors. In this study, the promoters of SiPTI1 family members were analyzed, and a large number of cis-elements related to stress response (e.g., MYB, MYC, ABRE, and DRE) were found. Meanwhile, the qRT-PCR results of the SiPTI1 family members indicated that they could be induced by various salinity and oxidative stresses, which were well correlated with previous reports. Furthermore, the expressions of SiPTI1-5 in 'Yugu1' and 'AN04' under salinity were analyzed (Fig. 10), which implied that the SiPTI1-5 were positively correlated with salt stress response.

SiPTI1-5 gene is involved in salt tolerance
The PTI1 gene was identified in tomatoes firstly, which was involved in a Pto-mediated signaling pathway, acting as a member downstream of Pto in a phosphorylation cascade during plant-pathogen interaction [3]. Besides, different members of PTI1 family have been reported to function in stress response in Arabidopsis [1,8], soybean [12] and cucumber [13]. The PTI1 gene in monocotyledonous maize [31], wheat [39,59], and rice [39,59] were involved in flower development and stress response, respectively. It has been reported that over-expression of PTI1-like gene ZmPTI1 in Arabidopsis enhanced the salt resistance [38], and over-expression of ZmPTI1-1 significantly enhanced the drought tolerance of Arabidopsis [58]. In addition, over-expression CsPTI1-L of cucumber positive regulated the responses of pathogen-defense and salt-stress [13]. In the current study, our results revealed that over-expression of SiPTI1-5 genes in yeast and E. coli. Strains increased their salinity tolerances. Taken together with its stress induction, we speculated that SiPTI1-5 genes would play important roles in foxtail millet in response to salinity and oxidative responses. However, the detailed salinity-responsive mechanism in the phosphorylation cascade needs to be further confirmed.

Conclusion
A total of 12 putative SiPTI1 genes were identified in foxtail millet using genome-wide analysis. The chromosomal distribution, intron-exon structures, motifs, duplication and divergence rates, cis-acting elements and subcellular localizations of the resulting proteins were analyzed. Synteny analysis and phylogenetic comparison of PTI1 genes from several different plant species provided valuable clues about the evolutionary characteristics of foxtail millet SiPTI1 genes. SiPTI1 genes play important roles in foxtail millet growth and development, and the expression patterns showed that they are induced by various developmental and environmental cues. The phylogenetic and gene expression analysis shed some lights on the functional analysis of SiPTI1 genes, suggesting a role for SiPTI1-5 may be involved in salt tolerance. Heterologous expression of SiPTI1-5 in yeast and E. coli enhanced tolerance to salt stress in this study. These results provide a valuable resource for better understanding of the biological roles of individual SiPTI1 genes in foxtail millet.

Plant materials and growth conditions
The seeds of "Yugu1" and "AN04" were kindly provided by Professor Diao Xianmin, Chinese Academy of Agricultural Sciences, Beijing.
For organ expression analysis of SiPTI1 genes, the seeds of "Yugu1" were soaked in water and germinated at 28°C for two days, and then the seeds were sowed in the field and the seedlings were cultured. At florescence, the samples were collected from roots, sixth internode, the seventh leaf and its sheath, as well as flowers, respectively.
For stress-responsive analysis of SiPTI1 genes, threeweek-old seedlings cultured in Hoagland solution were exposed to various salinity treatments (150 mM NaCl, 75 mM Na 2 CO 3 , and 100 mM NaHCO 3 ), as well as 10 mM H 2 O 2 for 0 h, 2 h, 4 h, 6 h, 8 h, 10 h, 12 h, 24 h, 48 h, and 72 h. Besides, for the comparation of the SiPTI1-5 gene expression in "Yugu1" (salt-tolerant variety) and "AN04" (salt-sensitive variety), two-week old seedlings from two varieties were cultured and treated with 150 mM NaCl for 0 h, 3 h, 6 h, 12 h, 24 h and 48 h. After treatments, the five young leaves were collected for qRT-PCR analysis.
In these experiments, collections from five plants were pooled in each sample, and the samples were frozen immediately in liquid nitrogen and then stored at − 80°C for further analysis. For each sample, three biological replications were performed for qRT-PCR analysis.
Total RNA isolation, cDNA synthesis and quantitative realtime PCR The total RNA of foxtail millet was extracted by Trans-Zol Up (TRANS), and the specific experimental steps were described in the instructions. RNA integrity has been confirmed by electrophoresis with 1% agarose gels. The expression characteristics of SiPTI1s in foxtail millet under different stress treatments were detected by qRT-PCR. For each plant sample, 1 μg of total RNA was reverse transcribed to cDNA in a 20 μl reaction system using a PrimeScriptTM 1st Strand cDNA Synthesis Kit (TaKaRa). The primers used for qRT-PCR analysis were designed from a non-conserved region by Primer-BLAST (http://www.ncbi.nlm.nih.gov/tools/primer-blast/ ) [34]. SiActin gene (AF288226.1) was used as reference gene for qRT-PCR analysis [34]. The primers used in these experiments are listed in the Additional file 8. Fold change was calculated using the 2 −ΔΔCt method [44]. Each experiment was repeated for three times. The data were shown as means ± standard deviation (SD). Statistical analysis was performed on SPSS 17.0. The statistical significance was determined using an analysis of variance (ANOVA), and significant differences (P < 0.05) between the values were determined using Duncan's multiple range test [44].

Phylogenetic analysis of PTI1 genes
To further investigate the evolutionary relationships of the PTI1 proteins in various plants species, the phylogenetic trees of the PTI1 was constructed. Multiple sequence alignment of PTI1 protein sequences were conducted with the ClustalX 1.81 program using the default multiple alignment parameters. The unrooted phylogenetic tree were constructed using MEGA7.0 software with a maximum likelihood method using sequences from S. italica (Si), S. lycopersicum (Sl), N. tabacum, (Nt), A. thaliana (At), O. sativa (Os), and Z. mays (Zm) [31], the PTI1 protein sequences used to construct phylogenetic tree but does not include SiPTI1s were acquired from NCBI (https://www.ncbi.nlm.nih. gov/) and the corresponding protein sequences of list in Additional file 2. The bootstrap consensus tree inferred from 1000 replicates [63,64].

Homologous alignment of PTI1 protein sequences
The sequences alignment analysis of PTI1s from foxtail millet, tomato, rice and maize. Was conducted using DNAMAN_6.0.
Chromosomal location, gene structure analysis, promoter analysis and estimation of genomic distribution and gene duplication All SiPTI1 genes were mapped to the nine foxtail millet chromosomes according to their ascending order of physical position (bp), from the short arm telomere to the long arm telomere, and were visualized using MapChart [65]. The exon-intron structures of the SiPTI1 genes were determined by comparing the CDS with their corresponding genomic sequences using the Gene Structure Display Server (GSDS) (http://gsds.cbi.pku.edu.cn/) [66]. The MEME online program (http://meme.nbcr.net/meme/ intro.html) for protein sequence analysis was used to identify conserved motifs in the identified foxtail millet PTI1 proteins [67]. The optimized parameters were employed are the following: the number of repetitions: any, the maximum number of motifs: 15, and the optimum width of each motif: between 6 and 100 residues [34,68]. The cisregulatory elements were identified using Plantcare (http://bioinformatics.psb.ugent.be/webtools/plantcare/ html/) database. All SiPTI1 genes were mapped to foxtail millet chromosomes based on physical location information from the database of foxtail millet genome using Circos [69]. Multiple Collinearity Scan toolkit (MCScanX) adopted to analyze the gene duplication events, with the default parameters [33,70]. To exhibit the synteny relationship of the orthologous PTI1 genes obtained from foxtail millet and other selected species, the syntenic analysis maps were constructed using the Dual Systeny Plotter software (https://github.com/CJ-Chen/TBtools) [71]. Non-synonymous (ka) and synonymous (ks) substitution of each duplicated PTI1 genes were calculated using KaKs_Calculator 2.0 [72,73]. Substitution rate of the PTI1 genes Ks and Ka were estimated according to previouslydescribed criteria [34,74] Ks and Ka substitution rates were calculated using the CODEML program and confirmed with the GEvo tool (https://genomevolution.org/ CoGe/SynMap.pl). The time (million years ago, MYA) of duplication and divergence time (T) was calculated using a synonymous mutation rate of λ substitutions per synonymous site per year as T = Ks/2λ (λ = 6.5 × 10-9) [33].
Assay for salinity tolerance of E. coli transformants The recombinant plasmid pET32a-SiPTI1-5 was generated by amplifying the coding sequence of SiPTI1-5 without the termination codon, and then inserting the sequence into the SacI/XhoI restriction site of pET32a. Then pET32a empty vector (as control) and pET32a-SiPTI1-5 recombinant plasmid were transformed into E. coli host strain BL21 (DE3), respectively. The expression of SiPTI1-5 in the recombinant cells was confirmed by SDS-PAGE analysis ( Supplementary Fig. 1). Transformed E. coli BL21 (DE3) cells carrying pET32a-SiPTI1-5 or pET-32a were grown overnight in LB liquid medium (contained 100 μg/ml ampicillin), respectively, which culture condition was 37°C, 180 rpm. For salinity resistance analysis, the bacterial cultures were diluted 50-fold using liquid LB, and incubated for 2-3 h at 37°C until OD600 = 0.5-0.6 [75]. Isopropylthio-β-D-galactoside (IPTG) was added to the cultures and make it final concentration was 0.5 mM for induction of expression of the inserted gene.
Spot assay was applied for salinity resistance analysis of SiPTI 1-5 transformed E. coli [75]. After 4 h (25°C) IPTG induction, the concentration of E. coli was adjusted to OD600 0.6 using LB liquid medium (contained 100 μg/ml ampicillin) [75]. In order to measure the response to salinity, the samples were diluted by 10 − 1 , 10 − 2 , 10 − 3 , and 10 − 4 folds with LB medium contained ampicillin. Three microliters of each diluted sample were plated on LB agar plates, LB agar plates supplemented with 0, 100, 250 mM NaCl, respectively. After incubation for 12 h on LB agar plates at 37°C [75]. The bacterial colony growth under salt stress was recorded with Canon digital camera.
For salt resistance detection of SiPTI 1-5 transformed E. coli in liquid culture media, the bacteria were cultured for 14 h at 25°C in liquid LB after IPTG induction. The absorbance value at OD600 was measured every 2 h and the data were recorded until OD600 reached to approximately two. The experiments were repeated for three times.

Assay for salt-stress tolerance of yeast transformants
The sequence of SiPTI1-5 was amplified and cloned into the KpnI/XhoI sites of pYES2 to construct the expression vector pYES2-SiPTI1-5, which was then transformed into yeast host strain INVSc 1. The pYES2 empty vector was used as the control. Fresh cultures of control and pYES2-SiPTI1-5 strains were prepared and adjusted to OD600 of 0.6 in YPD medium. This culture was successively diluted to 10 − 1 , 10 − 2 , 10 − 3 , 10 − 4 times, spotted on YPD (No salinity) or YPD medium supplemented with Na 2 CO 3 (8 mM, 10 mM, and 12 mM), NaHCO 3 (15 mM, 20 mM, and 25 mM), or NaCl (0.6 M, 0.8 M, and 1 M) and incubate at 28°C for 2 days to observe and photograph the phenotype with Canon digital camera. All experiments were repeated independently for three times.