Localization of QTLs for in vitro plant regeneration in tomato

Background Low regeneration ability limits biotechnological breeding approaches. The influence of genotype in the regeneration response is high in both tomato and other important crops. Despite the various studies that have been carried out on regeneration genetics, little is known about the key genes involved in this process. The aim of this study was to localize the genetic factors affecting regeneration in tomato. Results We developed two mapping populations (F2 and BC1) derived from a previously selected tomato cultivar (cv. Anl27) with low regeneration ability and a high regeneration accession of the wild species Solanum pennellii (PE-47). The phenotypic assay indicated dominance for bud induction and additive effects for both the percentage of explants with shoots and the number of regenerated shoots per explant. Two linkage maps were developed and six QTLs were identified on five chromosomes (1, 3, 4, 7 and 8) in the BC1 population by means of the Interval Mapping and restricted Multiple QTL Mapping methods. These QTLs came from S. pennellii, with the exception of the minor QTL located on chromosome 8, which was provided by cv. Anl27. The main QTLs correspond to those detected on chromosomes 1 and 7. In the F2 population, a QTL on chromosome 7 was identified on a similar region as that detected in the BC1 population. Marker segregation distortion was observed in this population in those areas where the QTLs of BC1 were detected. Furthermore, we located two tomato candidate genes using a marker linked to the high regeneration gene: Rg-2 (a putative allele of Rg-1) and LESK1, which encodes a serine/threonine kinase and was proposed as a marker for regeneration competence. As a result, we located a putative allele of Rg-2 in the QTL detected on chromosome 3 that we named Rg-3. LESK1, which is also situated on chromosome 3, is outside Rg-3. In a preliminary exploration of the detected QTL peaks, we found several genes that may be related to regeneration. Conclusions In this study we have identified new QTLs related to the complex process of regeneration from tissue culture. We have also located two candidate genes, discovering a putative allele of the high regeneration gene Rg-1 in the QTL on chromosome 3. The identified QTLs could represent a significant step toward the understanding of this process and the identification of other related candidate genes. It will also most likely facilitate the development of molecular markers for use in gene isolation.


Background
In vitro regeneration of cultivated tomato (Solanum lycopersicum L.) has been a constant subject of research because of the commercial value of the crop. Consequently, numerous studies on plant regeneration from a wide range of tissues and organs of wild and cultivated tomato germplasm have been published [1]. These studies demonstrate that organogenesis, the common tomato regeneration pathway, is strongly influenced by genotype as well as by several physical and chemical factors. These reports also document the existence of recalcitrance (partial or total inability to respond to in vitro culture), which greatly limits biotechnological breeding. High regeneration is crucial to the success of techniques such as haploid regeneration, genetic transformation, propagation, somatic hybridization, mutation selection and germplasm storage [2,3]. For example, the low efficiency of tomato transformation has been associated with the low regeneration potential of the cultivars used  [4,5]. In addition, in some cultivars, buds may be induced but do not develop into shoots [6]. In order to increase regeneration ability in low regenerating tomato cultivars, several introgression programs have been documented [7][8][9][10]. The process of in vitro shoot organogenesis usually involves a hormonal response of somatic cells, the dedifferentiation of differentiated cells in order to acquire organogenic competence, cell division of the responding cell(s) and initiation and development of new shoots from the newly dividing cell(s), either directly or indirectly through a callus stage [11,12]. Thus, many genes may be involved at different steps of this complex process. For instance, the cdc2 gene expression, which encodes p34, a key cell cycle regulator, has been proposed as an indicator of the state of competence to divide [13]. Genes that encode or regulate cytokinins and auxin may clearly influence regeneration. Both types of growth regulators act synergistically to promote cell division and antagonistically to promote shoot and root initiation from callus cultures [14]. In Arabidopsis, a Histidine Kinase (AHK) gene that encodes a cytokinin receptor (CRE1/AHK4) has been identified [15,16] and linked, like other AHKs, to cell division and regulation [17]. With regard to the initiation of shoot formation, the most characterized gene reported is ESR1, which confers, when overexpressed, cytokinin-independent shoot formation in Arabidopsis root explants [18]. ESR1 encodes a transcription factor belonging to the ethyleneresponsive factor (ERF) family and is classified in subgroup VIII-b. The ESR2 gene that encodes a protein that is very similar to ESR1 appears to have redundant functions that regulate shoot regeneration [19]. The expression patterns of other Arabidopsis ERF VIII-b subgroup genes may also be involved in early events of shoot regeneration [20].
Genetic analysis of regeneration in tomato suggests that dominant alleles determine high regeneration capacity [7,[21][22][23][24]. However, there is no consensus about the number of genes involved. For instance, Koorneef et al. [25] obtained regeneration segregation ratios in accordance with either a monogenic, digenic or trigenic model depending on the tester tomato line, despite the fact that none of the lines themselves were able to regenerate shoots from root explants. In this study, a dominant allele of S. peruvianum L. (Rg-1), which determines efficient shoot regeneration in tomato root explants, was mapped near the middle of chromosome 3. In addition, a putative allele of Rg-1 from S. chilense (Dunal) Reiche (Rg-2) was reported by Takashina et al. [9] and Satoh et al. [22]. Both alleles may act in combination with other alleles of either tomato or the wild relatives S. peruvianum or S. chilense [22,25]. On the other hand, Torelli et al. [26] identified a cDNA by mRNA-differential display that corresponded to the LESK1 gene and whose expression is specifically and transiently enhanced by the exposure to the hormonal treatment leading to caulogenesis (shoot induction). This gene encodes a putative serine-threonine kinase and has been reported as an in vitro caulogenesis marker in tomato [27,28].
Despite ongoing research into the genetic control of in vitro culture traits in tomato and other crops, there is still not enough information regarding which key genes are responsible for low or high regeneration ability, nor even the number of genes involved. The study and characterization of the reported genes and others that might be identified could greatly improve our understanding of the molecular mechanism underlying the different phases of tomato in vitro organogenesis. In the present study, we developed two mapping populations (F 2 and BC 1 ) from S. lycopersicum (as the recurrent parent) and S. pennellii Correll (as the regenerating parent) and conducted a QTL-based analysis. We hereby report the identification of six QTLs on five chromosomes. These QTLs present high significant LOD scores and together represent a high percentage of phenotypic variance. We also report markers associated with QTL peaks. In addition, we located two candidate genes, Rg-2 and LESK1, and performed a preliminary search for genes situated at QTL peaks. Our findings will complement the current knowledge of the genetics of regeneration and facilitate the development of molecular markers for use in tomato breeding and gene isolation.

Development of populations and evaluation of the regeneration ability
Two mapping populations, F 2 and BC 1 , were obtained from a low regenerating cultivar of tomato (cv. Anl27) and the organogenic accession of S. pennellii (PE-47). The BC 1 population was obtained using the tomato cultivar as the recurrent parent. In the first assay, the regeneration ability of the parents and the F 1 plant used for obtaining the mapping populations was checked by culturing leaf explants on shoot induction medium. Regeneration occurred with little callus development and can be considered as direct. As expected, S. pennellii and F 1 explants manifested a higher regeneration potential versus S. lycopersicum explants (P <0.001). The percentage of explants with buds (B) in S. pennellii was 100%, whereas only 10% was obtained in tomato cv. Anl27 (Table 1). Data obtained in F 1 for B do not significantly differ from those obtained for S. pennellii. The percentage of explants with shoots (R) and the number of regenerated plants per explant with shoots, considered to be the productivity rate (PR), was also higher in S. pennellii and F 1 than in cv. Anl27. However, for these traits (R and PR), the F 1 values differ significantly from those of S. pennellii ( Table 1).
The F 2 and BC 1 populations were evaluated for regeneration using explants from the parents and F 1 plants as controls ( Table 1). The phenotypes are shown in Additional File 1. The distribution obtained for each individual trait as well as the means for controls in this assay are presented in Figure 1. Mean values for B, R and PR in the F 2 population are between F 1 and tomato (P1), but skewed towards F 1 . For the PR trait, some F 2 plants were in a range higher than the S. pennellii parent (P2). This can be considered transgressive segregation. BC 1 yielded mean values for B, R and PR that were intermediate between F 1 and cv. Anl27 (Figure 1). B and R show a high correlation (r = 0.88/0.79 p < 0, 001 for F 2 and BC 1 data, respectively), which suggests common or linked genes controlling these traits. The correlation between PR and both B and R was lower (r = 0.56/0.52 p < 0, 001; 0.66/0.66 p < 0, 001 for PR and B and R for F 2 and BC 1 , respectively) indicating that different genes may influence the PR trait and/or variations between different biological samples are higher in PR.

Linkage maps
Genetic linkage maps were constructed from 106 F 2 and 113 BC 1 plants genotyped with SSR, COSI, COSII, CAPS and AFLP markers ( Figure 2). Of the 149 SSR and 97 other markers (86 COSII, 6 COSI, 5 CAPS) assayed, 78 SSR and 59 (51 COSII, 4 COSI, 4 CAPS) markers exhibited codominant polymorphisms. These markers were obtained from the Sol Genomics Network (SGN) webpage at http://www.sgn.cornell.edu/with the exception of 60 SSRs that were designed following the procedure described in Materials and Methods (see Additional File 2).
For the F 2 linkage map (Figure 2a), a total of 246 polymorphic loci were used, including 151 AFLP, 53 SSR, 35 COSII, 3 COSI and 4 CAPS markers. The markers were aligned in 12 linkage groups, with LOD scores ≥ 3.0. The average number of markers per linkage group was 20 and markers were well distributed over all the 12 linkage groups. The F 2 map spans 963.85 cM with an average interval of 3.72 cM between adjacent markers.      In the BC 1 population (Figure 2b), SDMs were fewer (30.3%) than in F 2 , and were observed mainly on chromosomes 6 (0.00-6.75 cM), 8 (0.00-15.40 cM), 11 (25.80-27.48 cM) and 12 (28.23-60.63 cM). The distortion on chromosome 8 was caused by a surplus of tomato homozygotes, whereas distortions on the other chromosomes were caused by an excess of hybrid genotypes.

QTL Identification
In order to identify QTLs, we first used Interval Mapping (IM) analysis that resulted in the identification of one QTL in the F 2 population and six in the BC 1 population (See Additional Files 3, 4, 5 and 6). The QTL identified in F2, located on chromosome 7, overlapped for the three traits. In the BC 1 analysis, this QTL also appeared for the R and PR traits. However, in this population, another five QTLs were identified on chromosomes 1, 3, 4 (at two different areas: 4a and 4b) and 8. All these QTLs were confirmed by restricted Multiple QTL Mapping (rMQM) analysis ( Figure 2b, Table 2). With the exception of the QTL on chromosome 8, all QTLs come from S. pennellii. These QTLs were named by their origin, Sp for S. pennellii or Sl for S. lycopersicum, followed by Rg (referring to regeneration) and the number of the chromosome on which they were located.
QTLs for regeneration traits in the BC 1 population Bud percentage (B) IM analysis identified two QTLs on chromosomes 1 and 8 (SpRg-1 and SlRg-8; Additional File 4). SpRg-1 has a maximum LOD score of 5.87 and is spanned by markers SSR316 and ME17-70. This QTL explained 22.9% of the phenotypic variation of the B trait. SpRg-8, with a maximum LOD score of 2.8, including just the C2_At1g64150 marker, explained 11.7% of the phenotypic variation in B. rMQM analysis, using C2_At2g45910 (chromosome 1) and C2_At1g64150 (chromosome 8) markers as cofactors, confirmed those QTLs detected by IM and detected a new one on chromosome 3 ( Figure  2b, Additional File 4). QTL characteristics are shown in Table 2. Collectively, these QTLs explained 34.6% and 48.3% of phenotypic variance in IM and rMQM, respectively.  Table 2). In this case, the percentage of the phenotypic variation explained by each QTL was 15% for SpRg-1, 13.3% for SpRg-4a, 14.9% for SpRg-7 and 9.3% for SlRg-8. Collectively, these QTLs explained 48.7% and 52.5% of the phenotypic variance in IM and rMQM, respectively.

Mapping tomato candidate genes
We selected the acid invertase gene linked to the Rg-2 regeneration gene of S. chilense [22] and the LESK1 gene, described as a marker in tomato for in vitro regeneration competence [27], as the tomato candidate genes.
The amplification products of the acid invertase gene marker (inv penn ) produce fragments of different sizes: 162 bp for S. lycopersicum cv. Anl27 and 173 bp for S. pennellii (see Additional File 7). Thus, inv penn was used for mapping the BC 1 population (Figure 2b, Additional Files 4 and 6). It was located in the QTL detected on chromosome 3, between the C2_At5g23880 and SSRB50753 markers, at positions 49.9 cM and 49.93 cM, respectively. For this reason, we named this QTL Rg-3 (a putative allele of Rg-2).

Exploring QTLs
The official annotation for the tomato genome provided by the International Tomato Annotation Group at the SGN was used to carry out a preliminary search for related regeneration genes near the identified QTL peaks. We found a histidine kinase in SpRg-7, several serine/threonine kinases in all identified QTLs, ethylene response factors (ERFs) in all identified QTLs with the exception of SpRg-4b, cyclines in SpRg-1, Rg-3, SpRg-4a and SpRg-7 and MADS-box in SpRg-1, SpRg-4a and SpRg-7.

Discussion
The wild tomato species S. peruvianum, S. pimpinellifolium L. and S. chilense were used as sources of regeneration genes in order to study the genetics of the in vitro regeneration in tomato [7,9,21]. In this study, we used one accession of S. pennellii (PE-47) as the high regeneration parent [29]. This accession, along with a previously selected low regenerating tomato cultivar (cv. Anl27), was used to develop two mapping populations (F 2 and BC 1 ). The use of the introgression lines of S. pennellii in the M82 tomato background [30] had been previously ruled out for this analysis because of the high regeneration ability of both parent lines (data not shown). Data in Figure 1 and Table 1 seem to indicate complete dominance for B, partial dominance for R and additive effects for PR. This is in agreement with other reported studies on tomato where dominance, to different degrees, depending on the regeneration trait studied, was also reported [21,22,24,25]. B and R traits show a high correlation in both populations, suggesting that common or linked genes control these traits. The correlation between PR and both B and R was lower. This could imply that other genes may be influencing the PR trait and/or variations between different biological samples are higher in PR (for instance, competition for development due to the presence of different shoots in a similar explant area). Thus, the low sample size may be also a possible explanation for the lower correlation. Some descendants in the F 2 population showed phenotypes for the PR trait that are more extreme that those shown by the regenerating parent line (Figure 1). Transgressive segregation has already been described in other reports in relation to the genetic control of plant regeneration [31][32][33], and suggests poligenic inheritance [34]. It also suggests the existence of alleles that promote, and others that inhibit, in vitro regeneration, with only some of the alleles with positive effects occurring in the same parent [34]. In fact, in this study, the SlRg-8 QTL that contributes to regeneration came from the low regenerating parent.
Plant regeneration from cultured tissues is assumed to fall under quantitative genetics [34], although evidence in tomato [22,25] and other vegetables [35][36][37] indicates that just a few genes could be responsible for regeneration. We identified 6 QTLs in the BC 1 analysis, which is indicative of the participation of a large number of genes in this character. These QTLs are situated on chromosomes 1, 3, 4, 7 and 8 ( Figure 2b). The percentage of variance explained by each QTL ranges from 7.4 to 27%, which is in accordance with the most common range (6-26%) reported in the genetic mapping of QTLs for tissue culture response in plants [34]. We used three traits (B, R and PR) as a measurement of regeneration capability that could be useful for detecting chromosome regions that act at different times.
In the F 2 population, only the QTL of chromosome 7 was identified for all analyzed traits (Additional File 3); the SDMs observed in most chromosome areas where QTLs were detected in the BC 1 population are most likely the cause (Figure 2). The SDMs on chromosomes 1, 3, 6, 10 and 11 were also observed in similar areas in the Tomato-EXPEN 2000 map [38]. SDMs affect the detection power of QTLs when QTLs and SDMs are closely linked [39], as occurred in our case. Deviation from the expected segregation ratio is a common feature of inter-specific tomato crosses [40]. To wit: in a F 2 population from S. lycopersicum x S. pennellii, De Vicente and Tanskley [41] reported a skewness rate of up to 80%.
In the BC1 population, three QTLs were detected for B: SpRg-1, SpRg-3 and SlRg-8. These QTLs may be associated with the first stages of regeneration, that is, hormonal induction response and bud formation. SpRg-1, which explained the highest percentage of variation for B (23.9%), was also identified for the R and PR traits. Given that bud formation is a necessary prerequisite for the production of shoots, it was expected that this major QTL for B would be found for R and PR, which in fact turned out to be the case ( Table 2). For R and PR, a common QTL on chromosome 7 (SpRg-7) was also identified. In addition, two QTLs were detected for R (SpRg-4a and SlRg-8) and PR (SpRg-4b and Rg-3). All these QTLs seem to be involved in the development of buds into shoots. As can also be observed in this study, common QTLs for the different regeneration traits, as well as a higher number of QTLs for traits related to plant development compared to those associated with bud induction, have been reported in different studies [42,43]. For instance, in Arabidopsis, Schianterelli et al. [43] found a common area of chromosome 1 in all analyzed parameters, a peak in chromosome 4 and another in chromosome 5 when they analyzed the total number of regenerated shoots. In wheat, Ben Amer et al. [42] identified three QTLs, two that affect green spot initiation and shoot regeneration and a third that only influences plant formation.
A partial common genetic system controlling the regeneration frequency of diverse types of explants has been reported by Molina and Nuez [36] in melon. This indicates that using different explants for loci detection may lead to the identification of some common QTLs, but also to the possible identification of other new QTLs. Root explants were used by Koornneef et al. [25] and Satoh et al. [22] for phenotyping, at which point two alleles for regeneration ability were located on chromosome 3 of tomato. In the present study, leaves were used for phenotyping and a QTL (Rg-3) in a similar area of chromosome 3 was detected in addition to other QTLs that influence regeneration and were identified on chromosomes 1, 4, 7 and 8. Differences in root and leaf explants for QTL identification were also found in Arabidopsis thaliana [43].
Koornneef et al. [25] located a dominant allele from S. peruvianum (Rg-1) near the middle of chromosome 3 that determines efficient shoot regeneration in tomato root explants. Satoh et al. [22] mapped a putative allele (Rg-2) from S. chilense on this chromosome. The acid invertase gene, reported as a marker linked to Rg-2, was chosen for mapping Rg-2 in our population derived from S. pennellii. The polymorphisms detected in our parents allow us to map this gene in the QTL detected on chromosome 3 that we named Rg-3. We consider Rg-3 to be a putative allele of the Rg-2 gene. Allelism must be confirmed.
The other gene chosen as a candidate was LESK1, which encodes a serine/threonine kinase, and was reported as a marker of competence for in vitro regeneration in tomato [27,28]. This gene was positioned on chromosome 3, but it is not located in the Rg-3 QTL.
The recent release of the entire genome sequence of tomato provides a powerful tool for interrogating QTL data. In this respect, we have taken a preliminary look at genes located at the peak areas of the detected QTLs, and which could be related to organogenesis. Histidine kinases were reported as cytokinin receptors [15][16][17]. In our QTL peaks, only one histidine kinase is located in the SpRg-7 QTL. The candidate tomato gene, LESK1, which has been described as a marker for in vitro competence, encodes a serine/threonine kinase. We looked for serine/threonine kinases and found this kind of protein in all identified QTLs. Other putative candidate genes could be ESR1 and its paralogue, ESR2, from Arabidopsis, which are the best-characterized genes related to regeneration [18,19]. These genes code for ethylene response factors (ERF). We found ERFs, which contain the AP2 domain, in all analysed QTLs with the exception of SpRg-4b. Cyclines related to cell division [13] were found in SpRg-1, Rg-3, SpRg-4a and SpRg-7. MADS-box genes, which have been correlated to adventitious regeneration induction and regulation [44,45], were found in the SpRg-1, SpRg-4a and SpRg-7 QTL peaks.

Conclusions
The results obtained in this study may very well represent a significant step toward the goal of understanding the processes underlying tomato tissue culture and regeneration responses. We have situated six QTLs on chromosomes 1, 3, 4, 7 and 8, five from S. pennellii and one from S. lycopersicum. The most important QTLs are SpRg-1, which is most likely associated with the morphogenetic response, and SpRg-7, which promotes bud development. A QTL detected on chromosome 3, Rg-3, likely contains a putative allele of the Rg-1 and Rg-2 genes, as is shown by mapping the acid invertase gene linked to Rg-2. QTLs detected on chromosomes 8 and 4 most likely contain genes influencing bud formation and development, respectively.

Plant materials and growing conditions
S. pennellii PE-47, which showed a high ability for regeneration [29], and the tomato cultivar Anl27 (cv. Anl27), with a low ability for regeneration, were chosen for obtaining the mapping population. The initial genotypes were established in vitro, starting with the sterilization of seeds by immersion for 10 min in a solution of 25% commercial bleach (40 g L -1 active chlorine), being then washed twice with sterile deionized water for 5 min each and then sown in Petri dishes containing nutrient medium (Murashige and Skoog [46] salts including vitamins, 2% sucrose, 0.6% plant agar (DUCH-EFA, the Netherlands). The pHs of the media were adjusted to 5.8 before sterilization at 121°C for 20 min. Cultures were incubated in a growth chamber at 26°C ± 2°C under a 16h photoperiod with cool white light provided by Sylvania cool white F37T8/CW fluorescent lamps (90 μmol m -2 s -1 ). Clones of one plant of each genotype were obtained and maintained in in vitro culture. The clones were multiplied by transferring nodes to tubes with fresh basal medium (BM: Murashige and Skoog -[46]-salts including vitamins, 1.5% sucrose and 7 g L -1 plant agar) every 3-4 weeks. The tubes were 15 cm in length and 22 mm in diameter, with 15 ml of medium per tube.

Mapping population
One clone of tomato and another of S. pennellii were transferred to a greenhouse in order to obtain the F 1 plant that was reintroduced in vitro by disinfection of shoots following a similar procedure as that carried out for seed sterilization. F 2 and BC 1 populations were obtained and seeds were germinated in vitro as described above.
The F 2 mapping population was composed of 106 individuals obtained from selfing one F 1 plant, the result of a cross between the tomato cv. Anl27 (P1) and S. pennellii PE-47 (P2). The backcross (BC 1 ) mapping population, composed of 113 plants, was obtained by crossing the cv. Anl27 and the F 1 plant. To allow the test to be reproduced, the F 1 plant and F 2 and BC 1 individuals were clonally replicated and maintained in vitro as described above.

Evaluation of the regeneration capacity
A first assay was performed with cloned P1, P2 and F 1 plants. Leaf disks (0.6-0.8 cm 2 ) obtained from in vitro cultured plants that were at a similar growing stage were placed with the abaxial side in contact with the shoot induction medium (SIM) containing Murashige and Skoog salts [46], 3% sucrose, 7% plant agar and 0.2 mg L -1 zeatin riboside (ZR). This growth regulator was sterilized by filtration and added to the sterile SIM. After 30 days of culture on SIM, the explants were transferred to BM for 20 days. In this medium, buds develop into shoots. For each genotype, five explants per plate (90 × 25 mm with 40 ml of medium per plate) and 10 repetitions per genotype were evaluated. At the end of the experiment, the following variables were analyzed: -Bud percentage (B): number of explants with buds × 100/total number of cultured explants.
-Regeneration percentage (R): number of cultures that differentiated into completely developed shoots × 100/ total number of cultured explants.
-Productivity rate (PR): total number of completely developed shoots/total number of cultured explants that regenerated plants.
In a second assay, leaf explants of F 2 , BC 1 , P1, P2 and F 1 plants were tested as explained above. In this case, for each genotype, five explants per plate and 4 repetitions per genotype were evaluated. Data for regeneration was obtained for 102 genotypes of the F 2 population and 104 genotypes of BC 1 . The average value for each trait and genotype was used for QTL analysis.
To assess the effect of genotype on regeneration ability, data from the genetically uniform classes (P1, P2 and F 1 ) were subjected to a unifactorial analysis of variance (ANOVA), and then means for the different traits were separated by a Duncan test. The correlations between the different traits were calculated using the Statgraphics Plus 4.0 software.

Preparation of genomic DNA
Young leaves from in vitro-cultured plants were collected and immediately frozen with liquid nitrogen and then stored at -80°C. DNA was prepared based on the modified CTAB method of Doyle and Doyle [47]. Subsequently, quality and quantity of the DNA was evaluated on 0.8% agarose gel stained with ethidium bromide and using the NanoDrop ® ND-1000 Spectrophotometer.

Amplified fragment length polymorphism (AFLP) procedure
AFLPs were obtained following de Vos et al. [48] procedure. Fifteen and sixteen selective combinations of primers were used for the F 2 and BC 1 populations, respectively. The code of each selective combination is specified in Table 3. Each code followed by the number corresponding to each obtained band (size in bp) is used to name the polymorphic AFLPs. Electrophoresis of the PCR products was conducted using an ABI PRISM 310 Genetic Analyzer (PerkinElmer Applied Biosystems, Foster City, California, USA). GeneScan™ 600 LIZ ® Size Standard, with fluorophore LIZ, was used as a molecular size marker. Raw data were analyzed with the GeneScan 3.1.2 analysis software (PerkinElmer Applied Biosystems) and the resulting GeneScan trace files were imported into Genographer 1.6.0. The AFLP fragments between 60 to 380 bp were scored in Genographer as present (1) or absent (0).

Microsatellites (SSRs)
One hundred and forty-nine SSR markers were used to detect polymorphism between P1 and P2, which included 89 SSRs previously reported and mapped onto the Tomato-EXPEN 2000 available at SGN [49,50], along with 60 new SSRs: 18 from the COMAV research group "Aprovechamiento de la variabilidad estraespecífica en la mejora del tomate" and 42 designed from sequences deposited in Genbank (see Additional File 2). Primer pairs were designed from these sequences using the SSR Primer 3 tool http://frodo.wi.mit.edu/ [51]. The criteria used for designing the primers were as follows: the primer Tm ranged from 55 to 65°C and GC content was 50%. The presence of G or C bases within the last five bases from the 3' end of primers (GC clamp), which helps promote specific binding at the 3' end, was taken into account. In order to design the SSRs, wherever possible the AT/TA repetitions were selected based on the results obtained by Frary et al. [49]. All the SSRs, with the exception of those specified below, were labelled following the M13-tail method described by Schuelke et al. [52]. DNA amplification was carried out in volumes of 15 μL using a sample of 10 ng of DNA. The reaction mixture contained 1. ; 45 s at an annealing temperature (depending on the primer combination Tm) and a 1 min extension at 72°C, and a final extension of 10 min at 72°C. Amplified bands were visualized using a LI-COR sequencing gel (DNA LI-COR 4300; LI-COR Biosciences, Lincoln, Nebraska, USA); 10 μl of loading buffer (95% formamide, 2 mM EDTA, 0.001% bromophenol blue) and 5 μl of deionized water were added to the 5 μl PCR mix (2.5 μl of each IRDye 700 or IRDye800-labeled) samples which were denatured at 96°C for 8 min. Electrophoresis was performed in denaturing conditions at 50°C, using 6% acrylamide gels in TBE buffer.
The SSR356, SSR73, SSR248, SSR46 markers in which polymorphisms were visible in the agarose gels were amplified in volumes of 23.32 μl with: 10 ng of DNA, 1.6 mM MgCl 2 , 171.52 μM dNTPs, 0.214 μM of primers, 2.5 μl of 10 × PCR buffer, and 0.6 U TaqI DNA polymerase. The PCR conditions were similar to those applied before, with the exception of a final extension of 30 min in this case. Amplified bands were run in standard agarose gels (1 or 2%) in TAE buffer at 100V and visualized by ethidium bromide staining.

Conserved ortholog set (COS) and cleaved amplified polymorphic sequence (CAPS) markers
Ninety-six markers (86 COSII, 6 COSI, 4 CAPS) from the Tomato-EXPEN 2000 map [53,54] and one developed CAPS marker (Solyc07g049350) were tested for polymorphism between the P1 and P2 parents. The restriction enzymes used when required were those indicated in the SGN database. When restriction enzymes was needed, the protocol described in the commercial product's instructions (Fermentas, York, UK or Biolabs, Takara, Japan) was followed.
The PCR reaction was performed in a total volume of 12 μL using a sample of 10 ng of DNA. The reaction mixture contained 1.5 mM MgCl 2 , 200 μM dNTPs, 0.25 μm of primers, 1.2 μL PCR buffer 10X, and 0.3 U TaqI DNA polymerase. Amplification was performed using an Eppendorf 5333 Thermal Cycler, which was programmed as follows: 5 min at 94°C, 35 30-s cycles each at 94°C, 1 min at Ta (depending on the primer combination Tm) and a 2 min extension at 72°C, with a final stage of 10 min at 72°C. Amplified bands were separated by 1 or 2% agarose electrophoresis in TAE buffer at 100V, and visualized by ethidium bromide staining.

Map construction and QTL mapping
Linkage analysis for both mapping populations was performed with the JoinMap ® 4.0 software [55]. Markers were grouped into linkage groups at LOD ≥ 3, with the exception of those in chromosomes 9 and 10 of the BC 1 mapping population with LOD ≥ 2. Order was determined with a recombination threshold of 0.40 and distances were calculated using the Kosambi mapping function (Kosambi 1944). For the genetic map construction, AFLP, SSR, COS and CAPS markers were used (Additional File 8). The segregation ratio of alleles was evaluated for each locus by the Chi-square test with a significance threshold of P < 0.05. The expected segregation ratios were 3:1 and 1:1 for F 2 and BC 1 , respectively. Visual representations of the marker maps were created with the MapChart software [56].
QTL analysis on the F 2 and BC 1 phenotypic data sets was performed with the MapQTL ® 6.0 software [57]. Significance thresholds for the LOD values, corresponding to a genome-wide false discovery rate of 5% (p < 0.05) were calculated by genome-wide permutation tests using 1, 000 permutations. Firstly, IM analysis was performed (simple Interval Mapping). Then, if many putative QTLs were detected by IM, markers close to the likelihood peaks of the detected QTLs were used as cofactors for rMQM (also called composite Interval Mapping) analyses.
Additional file 2: In silico-designed SSR markers. Table with the name, band size, repeat motif, temperature of annealing and primers sequences of in silico-designed SSR markers.
Additional file 3: Genetic location and LOD score profile of the F 2 -QTLs for regeneration components detected by Interval Mapping on chromosome 7 (SpRg-7). Genetic location and LOD score profile of the F 2 -QTLs for regeneration components (Bud percentage (B), Regeneration percentage (R) and Productivity Rate (PR)). On the left, projections of QTLs as black bars indicate the SpRg-7 for B, R and PR traits. The vertical dotted line indicates the 95% significant threshold value for declaring a QTL (B LOD threshold = 3.7) (R LOD threshold = 3.6) (PR LOD threshold = 4.4). Map position (cM) and distances are based on the genetic linkage map developed in this study. QTLs characteristics in attached table. Additional file 8: Markers used for genotyping the F 2 and BC 1 population. SSR, COS, COSII, CAP markers used for genotyping the F 2 and BC 1 population.