RNA-Seq Atlas of Glycine max: A guide to the soybean transcriptome

Background Next generation sequencing is transforming our understanding of transcriptomes. It can determine the expression level of transcripts with a dynamic range of over six orders of magnitude from multiple tissues, developmental stages or conditions. Patterns of gene expression provide insight into functions of genes with unknown annotation. Results The RNA Seq-Atlas presented here provides a record of high-resolution gene expression in a set of fourteen diverse tissues. Hierarchical clustering of transcriptional profiles for these tissues suggests three clades with similar profiles: aerial, underground and seed tissues. We also investigate the relationship between gene structure and gene expression and find a correlation between gene length and expression. Additionally, we find dramatic tissue-specific gene expression of both the most highly-expressed genes and the genes specific to legumes in seed development and nodule tissues. Analysis of the gene expression profiles of over 2,000 genes with preferential gene expression in seed suggests there are more than 177 genes with functional roles that are involved in the economically important seed filling process. Finally, the Seq-atlas also provides a means of evaluating existing gene model annotations for the Glycine max genome. Conclusions This RNA-Seq atlas extends the analyses of previous gene expression atlases performed using Affymetrix GeneChip technology and provides an example of new methods to accommodate the increase in transcriptome data obtained from next generation sequencing. Data contained within this RNA-Seq atlas of Glycine max can be explored at http://www.soybase.org/soyseq.


Background
Early hybridization-based studies indicated that the soybean genome has undergone at least one round of large-scale duplication [1]. This finding was supported by analyses of Expressed Sequence Tags (ESTs) [2,3], which suggested an additional duplication event, with estimated times of approximately 14 and 44 mya. The generation of so many duplicated genes likely gave rise to a large number of new, novel and perhaps unique gene functions [4,5]. It is possible to gain insight into their gene function through the exploration of transcriptome data.
With the release of a high-quality draft of the G. max genomic sequence [6], we are in a position to significantly improve our understanding of the soybean transcriptome. Previous gene expression studies have been performed using EST sequencing, spotted microarrays and Affymetrix GeneChip technology. These include a study in soybean seed development using laser capture microdissection [7] and studies of the iron stress response in soybean [8]. Other expression atlases have been produced for Arabidopsis thaliana, Oryza sativa, Lotus japonicus and Medicago truncatula [9][10][11][12]. However, array-based methodologies are constrained by prior knowledge of gene sequences. This limits the patterns of gene expression to a subset of the total transcriptional activity in an organism. For instance, the soybean Affymetrix GeneChips used in the Le et al. (2007) study contained sequences that represent 21,790 genes in the Glyma1.01 genome assembly [13,14]. This is less than half of the genes identified as "high confidence" gene models in G. max in the Glyma1.01 annotation release, and less than a third of all the predicted genes in G. max [6]. As a result, information collected using these GeneChips is incomplete, providing only a fragmented picture of transcript accumulation patterns.
The recent development of next-generation sequencing technology provides information on gene expression independent of genomic sequence knowledge. It also has the advantage of higher sensitivity and greater dynamic range of gene expression than array-based technologies [15][16][17]. The RNA Sequencing method (RNA-Seq) was originally developed to take advantage of the next-generation Illumina sequencing technology to improve the annotation of the yeast genome and explore its transcriptional expression profile [17]. The RNA-Seq approach was shown to have relatively little variation between technical replicates [16] for identifying differentially expressed genes. This technique has since been applied to several other organisms to answer questions regarding gene annotation and gene expression, but to our knowledge has not been applied to create an organism-wide gene expression atlas [15,[18][19][20][21][22][23].
In this report, we apply RNA-Seq to investigate seven tissues and seven stages in seed development in G. max, and compare transcript reads to the most recent release of the G. max genome sequence (assembly Glyma1.01). We present an overview of the RNA-Seq data for soybean as a potential model for future RNA-Seq atlases, and address several challenges that arise due to the nature and quantity of next-generation transcriptomic sequence data.

Mapping of short-read sequences
Tissues from leaf, flower, pod, two stages of pod-shell, root, nodule and seven stages of seed development were collected from soybean plants (experimental line A81-356022) and raised in growth chambers designed to mimic Illinois field growth conditions. Throughout this manuscript, tissues from stages of development are labeled according to approximated Days After Flowering (DAF) where appropriate (see Experimental Procedures). Total RNA from each tissue and developmental stage was isolated and sent to the National Center for Genome Resources (NCGR) for sequencing. Data from the Illumina Genome Analyzer II instruments produced 5.8 to 8.9 million 36-bp reads for each of seven non-seed tissues and 2.7 to 9.6 million 36-bp reads for each of seven stages of seed development (Additional file 1). The alignment program GSNAP [24] was used to map the reads to two reference genomes: G. max and Bradyrhizobium japonicum. A digital gene expression analysis was performed on the 'uniquely mappable' genome [15] which includes reads that mapped to the reference genomes with at most two mismatches or one indel and no mismatches [25]. Reads that failed these criteria or mapped to multiple locations were excluded.
The following groups of short-read sequences (from all 14 tissues) were excluded: 14.5% of the reads failed our criteria due to mismatches or indels, 35.2% mapped to multiple locations and 0.2% mapped to the B. japonicum genome. Highly repetitive sequences, defined as reads that mapped to 100 or more locations, ranged from 3.6% of the total reads in nodule to 52.3% of the total reads in seed 28-DAF suggesting that these highly repetitive reads may have important functional roles in specific tissues. Further investigation of highly duplicated genes plus transposable elements [26] may be warranted to determine what functional role highly repetitive sequences may have in these tissues.
There were 50.1% of the reads that passed the filtering criteria and mapped uniquely to the G. max reference genome. These reads were used in the digital gene expression analysis of all 14 tissues. Of the 66,210 predicted gene models in G. max (consisting of 46,430 high-confidence models and 19,780 lower-confidence models), 49,151 (74.2%) genes were transcriptionally active by the following definition: having a sum of at least two counts in one or more tissues in this study (Additional file 2). In the Glyma1.01 annotation set [6], 46,430 genes were identified as "high confidence" as determined by the following criteria: correlation to fulllength cDNAs, Expressed Sequence Tags, homology, and ab initio methods [12, Supplementary Information section 2]. Of those 46,430 highly-confident genes [6], 41,975 (90.4%) genes were transcriptionally active in this study (Additional file 3) and 4,455 (9.6%) highlyconfident genes were not. Conversely, there are an additional 7,176 (10.8%) transcriptionally active gene models from the lower-confidence gene models (Additional file 4). These gene models will be evaluated for possible inclusion to the list of highly-confident gene models.

Expression and gene structure
Since transcription of genes may be inversely correlated with gene size in plants [27], the coding regions of the predicted genes were inspected to provide insight into the characteristics of an expressed gene in G. max. The average lengths of the first, internal and last exon for the predicted genes were 313. 6 [28]. The GC content of the exons in G. max and A. thaliana were also similar ( Table 1: a). The significance in the size differences were evaluated using the non-parametric Mann-Whitney U test with a p-value cutoff of 10e -04 [27]. Interestingly, the coding regions of genes that were not found to be transcriptionally active in this study were smaller and had a lower GC content than coding regions in genes that were transcriptionally active (Table 1: b,c). A similar trend was found for the genes identified as highly-confident and for genes that were not identified as highlyconfident (Table 1: d,e). The genes identified as neither highly-confident nor transcriptionally active (Table 1: f) have the smallest exon length and lowest percentage GC content in G. max. This group, which has the smallest genes, may correspond to pseudogenes or may indicate that further improvement is needed in gene model prediction. However, a larger sampling of tissues over several developmental stages and environmental stresses is required before pseudogene determinations can be made.

Tissue-specific analysis of the soybean transcriptome
For the tissue-specific analyses, raw digital gene expression counts were normalized using a variation of the reads/Kb/Million (RPKM) method [15,17]. The RPKM method corrects for biases in total gene exon size and normalizes for the total short read sequences obtained in each tissue library. A hierarchical clustering analysis of the transcriptional profiles between tissues and developmental stages using a Pearson correlation suggested three groupings of tissues: underground tissues (root and nodule), seed development (seed 10-DAF, seed 14-DAF, seed 21-DAF, seed 25-DAF, seed 28-DAF, seed 35-DAF and seed 42-DAF) and aerial tissues (leaf, flower, pod-shell 10-DAF, pod-shell 14-DAF and onecm pod) ( Figure 1) [11].
A Z-score analysis was conducted to gain insight into the gene expression patterns of each tissue [11]. The Z-score numerical value is calculated by taking for each gene and tissue the (RPKM)-normalized log 2 -transformed transcript count, subtracting the normalized mean transcript count of all tissues and dividing by the standard deviation of the normalized transcript count of all tissues. The Z-score numerical value measures the number of standard deviations the expression level of a gene in a specific tissue is from the mean expression level in all tissues. The Z-score analysis revealed that aerial and underground tissues are distinguished from seed tissue by a bimodal expression pattern with more genes from aerial and underground tissues shifted toward higher expression values ( Figure 2). Transcription values in non-seed tissues are less similar than transcription values in stages of seed development resulting in a greater distribution of Z-score values and a noticeable portion of genes with Z-score values near the positive extreme between 3.4 and 3.6 indicating a high specificity for the tissue. We provide a supplementary list of genes with Z-scores in the 3.4 to 3.6 value range for each tissue (Additional file 5). To examine the validity of tissue specificity using Z-score analysis, we inspected the gene annotations based on the Dana Farber tentative consensus sequences [29] for all genes greater than 5000 (RPKM) normalized count in nodule tissues. Of the ten genes with this level of expression found between a Z-score value of 3.4 and 3.6 in nodules, all genes had an annotation. We identified four genes: Glyma10g34290, Glyma10g34280, Glyma20g33290 and Glyma10g34260 as leghemoglobin A, leghemoglobin C1, leghemoglobin C2 and leghemoglobin C3, respectively. We identified another five genes: Glyma13g40400, Glyma14g05690, Gly-ma15g05010, Glyma19g22210 and Glyma13g44100 as nodulin 20, nodulin 22, nodulin 24, nodulin 26B and nodulin 44, respectively. The last gene, Glyma08g14020, was identified as a nodule specific extensin gene based on the PANTHER classification system [30]. These gene a) All -All 66,210 predicted genes. b) Expressed -The subset of the predicted genes that were transcriptionally active according to our definition: total of two counts in one or more tissues. c) Not Expressed -The subset of the predicted gens that were not transcriptionally active according to our definition. d) Confident -The subset of genes that were identified in the final draft of the soybean genome as highly-confident. e) Not Confident -The subset of genes that were not identified in the final draft of the soybean genome as highly-confident. f) Not Expressed, Not Confident -The subset of genes that comprise the intersection of c and d: the genes are neither expressed or highly-confident. Relationship between exon length, percent GC content and transcriptional activity for three classes of exons: the first exon (first), the internal exons (internal) and last exon (last). The total number of genes in each group and the total exon length is also indicated.
annotations support the validity of using high Z-score values for identifying tissue specific genes from RNA-Seq data.
A heatmap of the RPKM normalized log 2 -transformed transcription count was generated on the top 500 genes with the highest expression ( Figure 3). Two areas on the heatmap indicate high gene expression and specificity to seed and nodule, respectively (Figure 3 boxes). The genes that are specific to nodule are many of the same as those identified by the Z-score analysis (Additional file 6) whereas the genes specific to all of seed development were less apparent in the Z-score analysis (Additional file 7). These genes specific to seed development have gene annotations based on the Dana Farber tentative consensus sequence that include many well known seed specific molecular functions: beta-conglycinin, oleosin, lectin, lipoxygenase, sucrose-binding protein and seed coat BURP domain protein. The high expression levels of these genes suggest an important role during seed development and warrant further investigation especially for those genes with no known annotation. The Z-score analysis of all tissues and heatmap of genes with the highest expression values in this RNA-Seq atlas is provided for further investigation into tissue specific genes.

Gene specific analysis of transcription in multiple tissues
On the other side of the gene expression spectrum are genes that have little variation across all tissues and developmental stages. These are thought to fulfill housekeeping functions. Housekeeping genes (HKGs) are commonly used as reference genes to normalize expression counts across tissues and developmental stages [31]. As a starting point for identifying HKGs in soybean, we provide a list of 1000 genes generated from the lowest coefficient of variation (CV = standard deviation/mean) among the RPKM normalized expression counts of the predicted gene models in the 14 tissues (Additional file 8).
A GOslim analysis [8,32] on the HKGs was performed to determine what functions are represented in this list. A Fisher's exact test [33] determined the GOslim functions that were over-represented in the HKGs when compared with all expressed genes and indicated an over-representation of the following functions: 4-alphaglucanotransferase activity (GO:0004134), RNA binding (GO:0003723), mRNA 3′-UTR binding (GO:0003730), structural constituent of ribosome (GO:0003735) and translation initiation factor activity (GO:0003743). Several other organisms contain genes with similar functions have also been indicated as stably expressed adding support to the list of HKGs generated here [12,34].
Interestingly, when all the tissues are included in the HKG analysis only three genes had a correlation of variance below 20%. However, if only the subset of tissues that represent seed development are included in the analysis 324 genes, many of which have HKG related annotations, have a correlation of variance value below 20% (Additional file 9). Although it would be advantageous to identify genes to use as universal references for normalization, it may not be possible to identify genes that are constitutively expressed at high and stable levels in all tissues and developmental stages under all biotic and abiotic stresses. Thus, these lists should be used as guides and the raw (Additional file 10) and RPKM normalized data (Additional file 11) is provided for reanalysis to identify the best constitutively expressed genes in the particular tissues of interest.
In the Glyma1.01 gene set [6], 448 soybean genes were identified as specific to legumes. In the context of the Schmutz et al. paper, this means the gene was identified in M. truncatula and G. max and not in Populus trichocarpa or more distantly-related species. In our study, 315 of these Legume-Specific Genes (LSGs) had a RPKM normalized log 2 transformed transcription count greater than zero in at least one tissue. An analysis of the transcription patterns of these LSGs in the 14 tissues indicated a propensity for the LSGs to be transcribed in specific tissues as indicated by boxes in the heatmap (Figure 4). Every major tissue group contained a cluster of genes with unique transcription of legume-specific genes. There were also constitutively expressed LSGs with transcription in all tissues.
Legume-specific expression in specific tissues is also supported by evidence of preferential gene expression in nodules of Medicago [11].
An inspection of the legume specific genes found only in seed development revealed three genes with similar expression profiles that vary between no expression in seed 10-DAF and some of the highest expression seen in the heatmap in seed 42-DAF. The first two genes, Glyma06g08290 and Glyma04g08220 are oleosins (based on annotations in the Dana Farber tentative consensus sequences). The third gene, Glyma02g01590, has an annotated of "lectin precursor 1" [35]. These three genes were also identified in the heatmap for the highest expressed genes. Oleosins are membrane proteins found in seed oil bodies [36] whereas lectin precursor 1 is localized to protein storage vacuoles [35]. A more indepth analysis may be warranted for these genes to determine how their similar expression profiles in seed development is affected by the negative correlation between protein and oil seed content.
General trends in expression profiles for all genes were examined by a comparison of the transcription count for every tissue to every other tissue using a Fisher's exact test with a FDR correction of 0.05 [37]. To visualize the number of genes that have significantly different expression between two tissues, we created a table in which each cell represents the number of genes that have a significant increase in gene expression between a tissue on the vertical axis and a tissue on the horizontal axis ( Figure 5). Under this scheme, all differentially expressed genes for two tissues, for example root and leaf, are given by the genes in the root (left) to leaf (bottom) cell plus the genes in the leaf (left) to root (bottom) cell. This table indicates that the two tissues with the greatest number of genes exhibiting a significant increase in gene expression occur between seed 28-DAF and flower with 27,945 differentially expressed genes. Similarly, the tissues that have the least number of genes with a significant increase in gene expression occur between seed 25-DAF and seed 28-DAF with 168 genes.
One application of this table is to explore the differential gene expression between two developmental time points in a tissue of interest to gain insight into the gene functions and thereby the biological processes that occur during particular stages of development. For instance, the GOslim molecular functions over-represented in the 168 genes that show a significant increase in gene expression between seed 25-DAF and seed 28-DAF are cellulose synthase activity, nutrient reservoir activity and urease activity. For the 334 genes with a significant increase in gene expression between seed 35-DAF and seed 42-DAF the over-represented GOslim molecular functions are structural constituents of cell wall, nutrient reservoir activity and urease activity. We see that both nutrient reservoir activity and urease activity are important biological processes that occur during these stages of development. A web interface for this table is provided that links each table cell to a downloadable list of genes.
We also explored gene expression in the underground, seed and aerial tissue groups identified by the hierarchical clustering analysis. A gene is considered preferentially expressed in one of these groups if there is a significant increase in transcriptional activity based on a Fisher's exact test (as described above) in at least one tissue of the group over all other tissues. The underground, seed and aerial gene lists contain 6,939 (Additional file 12), 2,036 (Additional file 13) and 6,425 (Additional file 14) genes, respectively.
The characterization of the coding region of genes found in each tissue group may improve our understanding about how exon size and tissue-specificity may be related. An analysis of exon length and GC content for each of these groups revealed that gene expression in each group of tissues has larger coding regions and a higher percentage of GC content than the average of all predicted genes (Table 2). However, interpretation of these results needs to be made with caution since the larger exon size and higher GC content may be an artifact of identifying significantly expressed genes resulting in an increase in the average transcriptional activity within the group [27]. However, since the process of identifying genes with preferential expression is identical for each group, a comparison between groups is straightforward. Using a Mann-Whitney test [38] to verify our observations, we find that genes with preferential expression for underground tissues have a larger first exon than seed and aerial tissues. On the other hand, aerial tissues have a greater number of exons than seed and underground tissues. The Mann-Whitney test also suggests the differences between the lengths of the total transcribed regions for seed, underground and aerial tissues are significant. The total length of the transcribed regions for each of the tissue groups are 2992.7 ± 4804.5, 3483.8 ± 2738 and 4208 ± 3308.5, respectively. Since the total exon length for each group did not vary significantly, this suggests the average total intron length varies depending on tissues type. Additionally, no significant relationship between GC content and tissue-specificity was found.
Each list of preferentially expressed genes contains a wealth of information about gene coexpression. As an example, we explored a dendrogram (Additional file 15) generated in the R programming language using the hclust command [39]. A dendrogram shows how genes are clustered based on gene expression but lacks a description of the log 2 transformed expression data for the genes found in each subclade. Dendrograms of this size were not explored in previous gene expression analyses [10][11][12] likely due to the challenge of displaying the dendrogram in a meaningful way. The number of genes in the seed dendrogram resulted in a figure that was much wider than it was tall making visualization of the overall clade structure difficult.
To better summarize the hierarchical clustering analysis, we present a boxplot dendrogram. The seed dendrogram Figure 5 Tissue by tissue comparison. This figure shows the total number of genes with a significant increase in gene expression between the row tissue (left) and the column tissue (bottom). For the genes reported in each cell, there is more transcriptional activity in the column tissue than the row tissue. For example, there are 7,298 genes that have a higher transcriptional activity in young leaf than in flower. Also, there are 10,262 genes that have a higher transcriptional activity in flower than in young leaf. These two statements are mutually exclusive and therefore each cell represents a different set of genes.
was simplified to provide the viewer with an overview of the clade structure ( Figure 6). The genes below the overview dendrogram, representing a subclade, were grouped together and the log 2 gene expression values for each tissue in the transcriptional profile were displayed as boxplots ( Figure 6). The advantage to this type of display is apparent in the three figure inserts, which indicate that the clustering resulted in three clades. Clade 1, clade 2-1 and clade 2-2 correspond to genes with significant increase in transcription primarily in early seed development (seed 10-DAF, seed 14-DAF and seed 21-DAF), genes with significant increase in transcription primarily in late seed development (seed 25-DAF, seed 28-DAF, seed 35-DAF and seed 42-DAF) and genes with a significant increase in transcription primarily at an intermediate stage in seed development (seed 14-DAF, seed 21-DAF and seed 25-DAF), respectively. Hierarchical clustering was also performed to generate dendrograms for the aerial and underground preferentially expressed genes lists and are provided as supplementary figures (Additional file 16, Additional file 17). All dendrograms and lists can also be access via the RNA-Seq website [40].

Discussion
In this report we present an RNA-Seq Atlas (Seq-Atlas) for Glycine max using next generation Illumina sequencing of the soybean transcriptome. One of the open questions concerning the RNA-Seq method is what to do with short read sequences that map to multiple locations in a genome. This question is particularly relevant in the paleopolyploid genome of G. max, which has undergone two rounds of large-scale duplication events in the last 60 My that resulted in as many as four regions of synteny within most of the genome [6]. Previous studies have indicated the potential for under-representing the total number of counts for a gene especially in closely related gene families [15]. We found that as long as we were aware of the potential pitfalls of under-representing the gene counts, valuable insight into gene expression and the functional relatedness of genes could be obtained from the uniquely mappable reads alone.
Given our limited understanding of the full complexity of the soybean genome, it is gratifying that only a small percentage (3.5%) of the reads that mapped uniquely were located outside the predicted gene models. This suggests that the initial annotation of the soybean genome sequence has captured the majority of transcriptional activity. Using the additional information on transcriptionally active regions, refinement of the existing gene models and the ability to identify new gene models will be improved.
In an analysis of gene-specific expression in multiple tissues, one of the challenges is overcoming the large dynamic range of expression counts generated by next generation sequencing technology to identify genes with similar overall expression profiles. The data presented here has a dynamic range for gene expression greater than six orders of magnitude. Although a log 2 -transformation can significantly reduce the dynamic range, a hierarchical clustering on log 2 -transformed data [11,16,17] has the potential to miss genes with highly similar gene expression profiles but with significantly lower or higher gene expression at each tissue. To identify all genes with similar gene expression profiles, a Fisher's exact test with a FDR correction of 0.05 for a given gene was performed on the raw expression counts between each tissue and every other tissue resulting in a complete description of change in gene expression. Since the Fisher's Exact test normalizes for total counts in the calculation and the comparison was between counts of the same gene and therefore have the same gene length, the raw counts (pre-RPKM normalization) were used. A hierarchical clustering of gene expression based on the direction of change in expression and whether or not it fails the null hypothesis that the expression levels are the same between two tissues identifies all genes with similar expression profiles regardless of the expression levels in each tissue. aerial -The subset of genes with preferential gene expression in aerial tissues. seed -The subset of genes with preferential gene expression in seed developmental stages. underground -The subset of genes with preferential gene expression in underground tissues. Relationship between exon length, percent GC content and specific tissue groups for three classes of exons: the first exon (first), the internal exons (internal) and last exon (last).
In the analysis of tissue-specific gene expression (Figure 1), we determined that the general pattern of gene expression fell into three groups ( Figure 1): underground, seed and aerial tissues. The similarity between this clustering using RNA-Seq and the clustering of transcriptionally similar tissues in Medicago [11] using Affymetrix GeneChip technology further validates this result. The tissues in soybean are clustered by closely related plant structures: nodules are modified root cortical cells; each seed stage is part of seed development and pods, shells and flowers are modified leaves [41,42]. In addition, seed developmental stages are more similar to aerial tissues than to underground tissues, as seeds are more similar to pods than to roots.
Although expression profile similarity does not necessarily imply similar function, it may provide insight into co-regulated networks of genes. Clusters of genes that are similarly expressed in specific tissues or developmental stages may provide a hint as to the functional role of the genes with no known molecular function. In an effort to divide the data into manageable pieces, we first identified genes that were significantly expressed in seed over the other two tissue groups: underground and aerial. Then, we performed a hierarchical clustering analysis to identify interesting sub-clades of genes with similar expression profiles in seed development. Many of the challenges in displaying and interpreting a dendrogram (Additional file 15) were overcome by combining the dendrogram with log 2 -based boxplots of each tissue ( Figure 6) resulted in three clades. Clade 1, clade 2-1 and clade 2-2 contain genes with significant increase in transcription primarily in early, late and intermediate seed development stages. A Fisher's exact test with a Bonferroni correction was performed on the GOslim categories for genes the three clades to determine which GOslim categories were over-represented when compared to the GOslim categories for all genes in the genome. The early seed development clade was over-represented in betaglucuronidase activity, galactosyltransferase activity, structural constituents of ribosomes and glutamate dehydrogenase activity. The intermediate seed development clade (2-2) was over-represented in leucocyanidin oxygenase activity, whereas the late seed development clade was over-represented in nutrient reservoir activity.
Since seed protein is negatively correlated with seed oil content and yield [43], genes with a GOslim function of nutrient reservoir activity may provide insight into the seed-filling process. To better understand the extent of clustering for genes with nutrient reservoir activity in the late seed development clade and to determine their relationship with seed filling, we identified all genes (143) in G. max with a GOslim molecular function corresponding to nutrient reservoir activity (Additional file 18). Of these genes, 83 are transcriptionally active in our data set, with a total transcription count greater than two in all tissues. Of these transcriptionally active genes, 19 are found in four subclades of the late seed development clade ( Figure  6a: numbers in squares). Twelve of the genes with nutrient reservoir activity are found in the subclade 2-1:G (Figure 6b). These genes are highly expressed with an RPKM normalized total transcription count in all tissues ranging from 39 to 62,401 counts. Additionally, the genes identified in clade 2-1 with a Goslim molecular function of nutrient reservoir activity are part of the seed-filling process as most of these genes have functions based on the Dana Farber tentative consensus sequence [29,44] that include glycinin, beta-conglycinin and sucrose-binding protein (Additional file 19). Since the other genes in the late seed development clade identified above have similar expression profiles to these 19 genes it is likely that there are other genes in the late seed development clade and in particular, genes in subclade 2-1:G that have similar or complementary roles in seed filling. Further data analysis is required to elucidate how the other genes in the late seed development clade relate to the GOslimidentified nutrient reservoir genes and how insight into the seed filling process will improve seed protein quality, content and yield. This RNA-Seq atlas provides a starting point for such an analysis.
As a final example to demonstrate the power of combining a RNA-Seq atlas with the genomic sequence, consider the soybean lipoxygenase genes (LOXs) [45]. Lipoxygenase enzymes act on polyunsaturated fatty acids to form polyunsaturated fatty acid hydroperoxides that can be converted to aldehydes and alcohols, which result in a lower flavor quality in soybeans [46,47]. Null genotypes were identified in gamma-irradiation experiments that knocked out the three lipoxygenase genes: LOX1, LOX2 and LOX3, that expressed during seed development [48,49]. LOX1 and LOX2 are linked and found on Chromosome 13, while LOX3 is located on Chromosome 15 [45]. The G. max Seq-atlas confirms that for the 72 lipoxygenase genes (Additional file 20) identified in the soybean genome and designated with a GOslim molecular function of lipoxygenase activity (GO:0016165), only 3 genes are highly and significantly expressed during seed development based on a Fisher's exact test with a FDR correction of 0.05 during seed development. The genes are: Glyma13g42310, Gly-ma13g42320 and Glyma15g03030 ( Figure 6: numbers in circles). The Seq-Atlas data and the latest genome release support the tight linkage between LOX1 and LOX2 on chromosome 13 -only approximately 7000 base pairs separate the two genes. Although the identities of these lipoxygenase genes were determined prior to knowledge of the genomic sequence and access to next generation sequencing [50], it is not difficult to imagine how the RNA-Seq atlas could be used to increase the efficiency of scientific discovery.

Conclusions
In summary, the G. max Seq-Atlas brings together RNA-Seq data from a diverse collection of tissues and provides new tools for the analysis of large transcriptome data sets obtained from next generation sequencing. This was achieved using the uniquely-mappable short read sequences in an RNA-Seq digital gene expression analysis of the paleopolyploidy soybean genome. We demonstrate how insight can be gained from the global expression patterns of genes, present a method for visualizing a hierarchical clustering of genes based on gene expression and show examples of how this SoySeq-Atlas can be mined. Genomic data from the emerging next generation sequencing technology [50,51] is rapidly accumulating and new methods for analyzing this data is required to improve our understanding of the genetics and genomics of legumes. The SoySeq-Atlas presented here provides a valuable resource for understanding the subtle nuances of the soybean genome and will allow scientists to generate the technological advances in legume agriculture that are required to meet the increasing demand for soybean products.

Plant material and RNA isolation
The seeds were derived from introgressing G. soja (PI468916) into G. max (A81-356022). Specifically, the BC 5 F 5 plant P-C609-45-2-2 was heterozygous for the LG I protein QTL introgression from G. soja. These seeds were planted directly into pots containing Bradyrhizobium japonicum-inoculated soil and supplemented with full nutrient fertilizer (Osmocote 14-14-14) in growth chambers at the University of Minnesota. Chambers were set initially to a photoperiod of 14/10 and thermocycle of 22°C/10°C and monitored to mimic Illinois field growing conditions. Relative humidity settings were 50-60%, and light intensity was measured at 550-740 μE m -2 sec -1 . All harvests occurred at 1400 hours and consisted of samples pooled from a minimum of three plants [52]. Samples were harvested from plants in parallel and flash frozen in liquid nitrogen before storage at -80°C. Open flowers and young leaf tissue samples were collected simultaneously. Pods and seeds were harvested by seed weight and pod lengths that correspond to approximated Days After Flowering (DAF) as specified. The one-cm pod was processed intact (approximately 7-DAF), while the four and five cm pods (approximately 10-13 DAF and 14-17 DAF) were divided into seed and pod-shell components. Seed 21-DAF, Seed 25-DAF, Seed 28-DAF and Seed 35-DAF had seed weights between 10 and 25 milligrams, 25 and 50 milligrams, 50 and 100 milligrams, 100 and 200 milligrams, and greater than 200 milligrams, respectively.
Root and nodule tissues were harvested from plants grown in growth chambers set to 16-hr photoperiods with light intensities ranging from 310-380 μE m -2 sec -1 . Seeds were imbibed for three days, planted in quartz sand and fertilized with a full nutrient solution. Root tissue was harvested after 12 days. Nodules were harvested at 20-25 days after inoculation; for these samples, plants were fertilized for the first seven days with nutrient solution containing 3.5 mM NO 3 and subsequently fertilized every other day with a full nutrient solution lacking nitrogen.
Soybean tissue samples were ground with liquid nitrogen by mortar and pestle. Total RNA was isolated by a modified TRIzol® (Invitrogen) protocol [53]. DNA was removed by digest with on-column RNase-free DNase (Qiagen), and RNA was purified and concentrated by RNeasy column (Qiagen). RNA quality was evaluated by gel electrophoresis, spectrophotometer and Agilent 2100 bioanalyzer.

Plant Ontology
The plant ontology obtained from Soybase [54] gives an approximate stage of development for each tissue in this study (Table 3). These definitions are based on development stages in tissues as presented by Carlson and Lersten (2004) [55] and Le et. al. (2007) [7]. The developmental process is affected by genotype, temperature, lighting and nutrition. Therefore, the plant ontology is provided as an estimate of the developmental stage of each tissue.

Exon length and transcriptional activity
A gene is considered transcriptionally active by our definition if two or more short read sequences uniquely map to a gene in one or more tissues. The first, internal, last exon lengths, percentage GC content, number of exons, and total exon length were extracted from the Glyma1.gff file represented on Soybase [56] as the 'gene models' track (Glyma1.01 genome assembly). Internal exon lengths were averaged and standard deviation was calculated for all values.

Sequencing, data processing, normalization and analysis
Total RNA was sent to the National Center for Genome Resources for next generation Illumina sequencing. Poly-A containing RNA was isolated from total RNA using oligo-dT25 magnetic beads (Dynabeads; Invitrogen, Carlsbad, CA). The resulting RNA is denatured and used as template for random-primed cDNA synthesis then end repaired withT4 DNA polymerase, Klenow polymerase and dNTPs. The polished fragments are phosphorylated by T4 polynucleotide kinase, followed by the addition of a single "A" base to the 3′-end of the blunt-ended phosphorylated DNA fragments. Illumina adapters are then added to the DNA fragments by ligation and size selected by electrophoresis for a desired size range of~500 bp. Purified DNA libraries are Sequence reads were then aligned using GSNAP [24] against a reference composed of the 8× soybean genome sequence assembly (Glyma1.01 genome assembly) to which was added the genome sequence of the symbiont Bradyrhizobium japonicum. The default settings in GSNAP were used. These settings include spliced alignments of the transcript reads to the genomic reference sequences requiring canonical splice sites and allowing introns of up to 10,000 bp; alignments were also allowed to include small indels and mismatches. The reads were divided into five classes: not mappable reads, highly repetitive reads, rhizobium reads, unique high quality reads, repetitive high quality reads and low quality reads. A sequence was considered not mappable if a read did not map to an interval on the reference genomes as identified by GSNAP [24]. If the Illumina read sequence mapped to over 100 locations on the reference genomes or to the B. japonicum reference genome then the sequences were considered highly repetitive or of rhizobium origin respectively. The remaining Illumina reads were sorted into high quality or low quality reads based on a cutoff of no more than two mismatches or one indel and no mismatches [25]. The high quality reads were further subdivided into uniquely mappable reads and repetitive reads if the best mapping for the read matched only one location or if the read mapped to 2-100 locations respectively. Reads from the high quality category that mapped uniquely were used for the digital gene expression counts. The determination of digital gene expression counts for each soybean gene model was performed in R (Additional file 21). The boundaries of each gene were taken as the maximal starting and ending positions from any of the transcripts associated with the gene, and any read alignment partially contained within this span was counted toward the expression of that gene in the given sample. The raw digital gene expression counts were normalized using a slight variation of the RPKM method [15,17]. The following equation was used: RPKM = 10 9 (C)/(N L) where C is the uniquely mapped counts determined from the high quality category, L is the length of the cDNA for the longest splice variant for a particular gene model and N is the total mappable reads which was determined as the sum of the high quality reads and the highly repetitive reads. Log 2 -transformations of this normalization were performed as specified in the methods below.

Gene list generation and Hierarchical clustering
Transcriptionally active genes were identified as genes with at least two uniquely mapped raw counts in any combination of tissues or developmental stages. The Fisher's Exact test with a false discovery rate correction of 0.05 [37] was performed on every combination of the 14 tissues resulting in a 196-element vector of change in transcriptional activity for each gene. Each element of the vector was assigned a -1, 0 or 1 corresponding to a significant decrease, no change, or a significant increase in transcriptional activity respectively. To identify genes with preferential gene expression in one of the underground, seed or aerial tissue groups (Figure 6), the 196element vector generated using the Fisher's exact test was filtered for genes that showed a significant increase in transcriptional activity in at least one tissue of the group over all tissues not in the group. Hierarchical clustering of genes in these lists was used to generate dendrograms for each tissue group based on the 196element vector using the hclust command and the default complete linkage method in R [39]. To generate the boxplot dendrogram, nodes were chosen that provided an overall picture of the clade structure. Genes below these nodes were grouped into subclades and a boxplot analysis was performed on the RPKM normalized log 2 -transformed data for the 14 tissues. The dendrograms and subclade boxplots generated in R were manually combined in Adobe Illustrator.
The tissue by tissue comparison of change in transcriptional activity was generated from the 66,210 row by 196 column matrix. There are 66,210 genes and 196 combinations of possible changes in transcriptional activity. A column sum was performed on the 66,210 rows for which there was a significant increase in transcriptional activity. The resulting 196 vector of column sums was then reshaped into a 14 by 14 tissue by tissue comparison.

GOslim analysis
The 66,210 predicted gene sequences in G. max (Glyma1.01 genome assembly) were compared with the predicted genes in the Arabidopsis genome (TAIR v. 8) [57] using TBLASTX (E < 10 -6 , [58]. The Arabidopsis gene model of estimated best fit was then connected to the concurrent gene ontology [32]. The annotations of the Arabidopsis gene model that best fit each soybean gene model were used as the basis for our gene ontologies.